Concrete & Foundation Repair of Los Angeles County, CA

Customer Mari D, of Long Beach, California, had been considering reinforcing her property, and with the string of recent earthquakes in and around the Los Angeles area, she found that now was a better time then any.  So, Mari did her research and found that Saber was the best company to come evaluate her property.  Upon the inspection, the Sales representative from Saber proposed to install  Simpson UFP 10 brackets at every corner of the foundation and every 6' from the center, as well as strapping each 4x4 post to each existing wood grinder beam, using Simpson T-straps and Simpson framing clips.  There was also a crack in the slab that was a concern to Mari, therefore; it was suggested that the crack be routed, cleaned and repaired using a two component epoxy injection method.

Mari found that this was the best option for her, so she scheduled to have a crew from Saber repair the crack in her slab and retro fit her property.  The crew was able to complete the project in the first day.  They began by going into the crawlspace where the work would be preformed, and installed and secured the T-straps, they then installed and secured the sill plates and repaired the crack with epoxy.  

Mari was very pleased with the work completed. It is safe to say, she now has piece of mind knowing that in the occurrence of the next earthquake in her area, her home has been safely secured. 

In Los Angeles, California, Saber Foundations was contracted to complete a job on a structure that had suffered from severe foundation settlement.  During the initial inspection it was also recommend that the property be retro-fitted with vertical and horizontal “I” beams.  The settlement that was occurring on this structure was most likely due to the shifting in the supporting soils beneath the foundation.  Using Foundation Supportworks, Inc, Push Piers made of steel and including a set of helical blades in the lower section of the pier, these are known as Helical Piers.  Soil is removed from around the foundation footing for proper pier placement.  Helical pier systems create a solid supporting base that transfers the weight of a structure downwards to strong supporting soils.  These piers are mechanically advanced into the soil using small construction equipment or hand equipment.  As they are installed to appropriate depths and capacities, they prevent any future settlement from occurring.  Once the proper depths are achieved, heavy duty steel foundation brackets are positioned below and against the foundation footing.  The weight of the structure is then transferred through the helical piers to deep, competent soils.  Lifting the structure back towards its original position is then attempted.  Then, the soil around the foundation is carefully replaced.  

During this installation, because of the size of the building and the length of the walls, 100 helical piers were installed to the exterior and interior of of the property.  These piers worked together to transfer the weight of the structure to the strong soils or bedrock below.  After installation, the owner will notice that any signs of the soils shifting will no longer be an issue.  This property was also retro-fitted with vertical and horizontal steel “I” beams.  This process involves the installation of engineered metal connectors and other reinforcement materials at key stress points throughout the properties structure.  The goal of the retrofitting process is to counteract three main earthquake-induced forces that can cause major damage to a building.  Saber’s experienced crew utilized the vertical and horizontal “I” beams to keep the properties structure together in spite of any seismic force that could easily tear an un-reinforced property apart.  The owner is not content with the fact that the property is once again stable and has been reinforced in the event of another earthquake, which in California is inevitable. 

Customer Olivia M, of Somis, California, and her husband purchased their 1980’s home a year prior, fully knowing it had foundation settlement issues. Researching the available options, Olivia determined that Saber had the best online reviews and would be the best company to evaluate the property. Subject site is a single story home supported by a slab on grade foundation. Noticeable cracking in the foundation and flooring tile was evident as well as the floor was determined to be out of level.  Upon inspection, Saber’s Project Specialist,  Joe J. proposed to install 12 hydraulically driven steel Push Piers at 6’ intervals along the affected area to stabilize and lift the home back to it's original elevation.

Saber’s Foreman Trevar A and his crew completed the Push Pier installation in three days and performed lifting and leveling on the fourth day, followed by Polyurethane injection.  Polyurethane was utilized to fill voids under the slab that were created during the lifting phase, further permanently supporting the foundation.

Another happy customer! Olivia was very pleased with the work completed. It is safe to say, she now has piece of mind knowing that the foundation of her home is stable.

Homeowners in Long Beach, California, had noticed signs of settlement at their property, cracks along the exterior of their home had started to appear.  This type of settlement is usually due to the unstable soils beneath the foundation.  The homeowners knew that something needed to be done to prevent any more cracking to occur.  

Saber was contracted to fix the issue.  Using PolyLEVEL™ the crew from Saber was able to stabilize the soils beneath the foundation.  By pumping PolyLEVEL™ beneath the foundation this added stabilization to already unstable soils.  Once the soils were stabilized the cracks were then repaired using gravity fed epoxy.  The expoxy closes the cracks and allows for the homeowners to re-stucco the home with out the worry that the cracks will reappear.  The homes foundation is now stabilized and the cracks are repaired. 

Homeowners in Long Beach, California, had noticed serious cracks forming in the columns surrounding their porch.  The homeowners knew that this was not normal, they did some research on the internet and found Saber.  A project specialist from Saber went to the property to do an evaluation.  The project specialist found that the soils were un-stabile and proposed that Saber install 3 helical piers to stabilize the porch and pillar.  This type of settlement is usually due to the unstable soils beneath the foundation.  

Saber sent a crew to complete the work for this homeowner.  The crew installed 3 helical piers at three different pier locations to stabilize the porch and pillar.  The helical pier is a steel pier that is driven into the ground like a screw.  The pier is driven down until it reaches solid stable bedrock below.  There were 2 piers installed to stabilize the porch, and one more pier installed to stabilize the pillar.  Once the installation is complete the piers will remain a permeant fixture and will stabilize the area.  

Homeowners in West Covina, had noticed several areas in and around their home that were cause for concern.  There were cracks forming in the interior and exterior walls of the home and the doors and windows were becoming difficult to open and close.

The homeowners had received a few bids from other foundation contractors and decided to go with Saber after meeting with the project specialist.  The homeowner was impressed with his professionalism and his overall knowledge of the situation, soon after Saber was contracted and the work began on the home.  The crew had to saw cut and remove some areas of concrete to place the piers in the correct locations around the home for maximum practical recovery.  The concrete was then replaced once the piers had been installed and the home had been lifted.  The homeowners were kept informed of any issues or changes that needed to be made during the process.  Once the piers had been installed and the lift pro formed, the crew then used our PolyLEVEL™ to fill the void underneath the home to prevent any future settlement to occur.  The homeowners no longer see the effects of the settlement; the cracks in the walls have been closed and the doors and windows are no longer hard to open and close.

Saber Geotechnical Construction Solutions proposed to stabilize an apartment complex in Agoura Hills using the Helical Piers and PolyLEVEL™ system.  PolyLEVEL™ is a two-part urethane that when combined, expands into a rigid foam used to fill voids, stabilize slabs and lift concrete.  Once injected through small 5/8 inch drilled holes in the surface or slabs, a chemical reaction converts the liquid urethane components into a strong, rapidly setting, waterproof foam material.

In it’s foam state, PolyLEVEL™ is light weight, weighing two to six pounds per cubic-foot (pcf).  Opposed to mud-jacking which can weigh upwards of 120 pcf, thus adding a significant burden to the supporting soils under the slab, and potentially contributing to further settlement issues.  With a compressive strength of 10,800 pounds per square foot, PolyLEVEL™ has the strength to support the most demanding residential loads.  For this job, Saber will use the polyurethane injection as a void fill once the helical pier system has been installed and the structure has been lifted in order to prevent any future settling. 

Homeowners in Diamond Bar, Ca had noticed signs of settlement in and around their propriety.  After doing some research on the web for the best way to resolve their foundation settlement issue, they contracted Saber.  A design specialist from Saber went to the home to do a property evaluation and found that the property did have some underlying soils issues which were causing the home to show the signs of settlement, interior and exterior cracks in the walls and the slab.

 The design specialist proposed to resolve the issue by installing push piers at 11 different locations around the property and to lift and stabilize the property using PolyLEVEL™.  The crew from Saber worked diligently to complete the project.  There were several areas that needed to have concrete removed in order for the piers to be placed at the proper locations.  The concrete was cut out and then the holes were excavated and the piers were installed.  Once all the piers had been installed the home was lifted to maximum practical recovery, and the then PolyLEVEL™ was used to fill the void that had formed under the foundation once the property was raised.  The homeowners no longer see the signs of settlement and know that their property is once again stable and settlement will no longer be an issue. 

Saber was contracted to repair a home in Granada Hills, California.  The home had suffered from severe settlement issues, causing cracks to form in the interior and exterior of the home, and the walls to bow.  The homeowners knew that they needed to get the home repaired before more settlement occurred and caused more issues.  Saber was able to repair the foundation using the Helical Pier system, along with PolyLEVEL™ to fill the void once the lift was completed.  This job required to concrete areas in the interior of the home to be removed to place the piers for the maximum stabilization.  There was also some crack repair work completed by the Saber crew, as well as sill plate bolting done in the crawlspace of the home.   The homeowners can no longer see the effects of the settling soils. 

Homeowners in Los Angeles, were looking for ways to make their home more energy efficient and to keep moisture out of their homes crawlspace.  After spending many hours researching the different ways to resolve their issues, they found that Saber and the CleanSpace encapsulation installed be Saber was the best option for them.  CleanSpace encapsulation is a 20 mil thick plastic liner, similar to a pool liner that can be fitted in your crawlspace to completely seal off your home from the earth.  The material is incredibly durable, will last as long as the home, and will stay in place.  Not only does CleanSpace make the homes crawlspace moisture free, and makes the home more energy efficient it also adds space for storage.  The Saber CleanSpace installation crew was scheduled to complete the project, they arrived at the site and went right to work.  The crew installed 418sqft of CleanSpace to the homes crawlspace area.  The process to install the CleanSpace began with the a dimpled polyethylene membrane under the CleanSpace liner which allows for water to flow to a sump in the crawlspace, once this is installed, the lining is then attached to the walls with fasteners that are permanently driven into the walls.  The Saber crew worked diligently to complete the crawlspace.  The homeowners can now not only enjoy the energy efficiency of the CleanSpace, but also the added benefits: CleanSpace has an antimicrobial additive manufactured into the material, which prevents mold growth on the liner.  This additive is odorless and safe.  

In Brea, California, a home was purchased at auction to be remodeled and resold.  Upon the inspection of the home after the new owners received the keys, they found that the home had some settlement issues, and in order to get the home remodeled and resold for market value or above they new owners knew they needed to get the foundation repaired.  The owners who are in the business of buying remodeling and reselling homes have used Saber in the past and knew without a doubt that when they saw what they were up against, knew they would call Saber to repair the foundation issue.  The Saber crew was able to repair the foundation using the four push piers, driven into the ground to bedrock, and then preform a lift of the home to maximum practical recovery.  Once the lift and stabilization was complete the new owners went to work to remodel and resell the home, they knew without Saber they could run into issues during the selling process and that to them was not an option.  The home is now stabilized and the owners are happy to know that they will be making a return on their investment. 

Homeowners in Beverly Hills, CA, we working on renovation of their home.  They found that the current sump pump they were using was not very efficient.  So they did some research and found the TripleSafe™ Sump Pump System installed by Saber.  The TripleSafe™ Sump Pump is not just a sump pump system.  It’s oversized plastic sump liner contains three sump pumps that can work together or individually depending on the pumping demands.  With this system you do not have to worry about over pumping, that may burn out single pump systems.  An added plus, in the case of a power outage, the TripleSafe™ system will keep operating, with the built in battery-powered backup pump.  The Saber crew installed the TripleSafe™ system quickly and efficiently for this homeowner.  The Homeowners are pleased with the pump and very happy they choose Saber and the TripleSafe™ system for their home.  

A homeowner in Long Beach, was wanting to retrofit their home and protect their investment from the inevitable California earthquakes.  The homeowner did some research and found that Saber was the best option for him.  The Design Specialist from Saber came to the property to do an evaluation.  During the walk through inspection the Specialist also found that the posts used to support the home needed to be replaced to prevent the home from settlement issues.  The homeowner was very impressed with the Design Specialist and the proposal presented during the walk through, and was ready to schedule the Saber Crew to come to the propriety and get started on the repairs.  The crew arrived and went straight to work, they replaced the wood posts and all of the existing post strapping.  They then continued with the sill plate bolting for the single story structure.  The homeowner can now rest easy knowing that the home is protected from an earthquake and any future settlement issues. 

A home in El Segundo, California was suffering from serious foundation settlement.  Large cracks had formed in the slab and walls of the home.  The homeowner was concerned with what was going on with the home, so they began to research options on how to repair or replace the foundation.  They found that replacing the foundation all together would not only be extremely expensive, but also very time consuming.  The homeowner knew that wanted something for a permanent fix, but something that would not break the bank.  The homeowners researched several options and found that Saber with their many years in business and positive reviews would be the best option.  A design specialist from Saber came to the property and competed an evaluation.  The homeowner liked the proposal and set an appointment for the crew to come out and get the work started.  The crew came out to the home and prepped 6 areas where piers would be located in order to repair the foundation of the home.  The holes were excavated and the piers were installed.  Once that was complete the holes were backfilled, the cracks that had formed around the home were then filled using an epoxy injection.  The crew also injected PolyLEVEL™ beneath the homes foundation to fill any voids that may have formed, and to protect the home from any future settlement. 

A homeowner in Palos Verdes Peninsula, was concerned with earthquakes that are inevitable in California, damaging their property beyond repair.  So they search for ways to protect their home from a damaging quake.  They found Saber and knew they would be a great company to use in retrofitting their home.  The crew from Saber competed the project tin a very timidly manner.  The crew installed sill plate bolting to protect the home from shifting movements caused during an earthquake.  The goal of the retrofitting process is to counteract three main earthquake-induced forces that can cause major damage to a building: racking, sliding and overturning. In engineer-speak, the retrofitting process transforms a building with loosely connected parts into a unified structure with a “continuous load path” that extends from the building foundation up through the walls and all the way to the roof framing. Our experienced crew will utilize an impressive arsenal of seismic connectors to keep your house structure together in spite of seismic forces that can easily tear an un-reinforced house apart.  The home is now secured incase of an earthquake. 

Daniel A, homeowner in Los Angeles called Saber to work hand in hand with the structural engineer to repair and support the pier and beam structure of his raised foundation "Crawl Space" home.

Engineer drawings called out for (15) Smart Jack girder supports as well as the removal and replacement of a failing grider.  The Smart Jack system was chosen for its engineered fill base and capacity of the entire install unit.  

The Smart Jack system is a great  support solution to mitigate against active clay soils under your home or to replace old and rotten timber supports.

The home was also further supported by installing 9 push piers around the property to raise the foundation back to level.  The home was sill plate bolted and nine existing posts were restated to add support. 

A home in Sherman Oaks was suffering from sagging floors throughout the home.  The homeowners were concerned with the floors and knew something needed to be done to fix the issue before it became more severe.  The homeowners found Saber and knew it was the right choice for them.  They made the appointment for the design specialist to come to the home and compete a property evaluation.  The specialist proposed that the home needed a new steel girder beam installed along with SmartJacks to further stabilize the home and lift the sagging floors.  The Saber crew was schedule to repair the foundation.  They removed the old rotted girder beam and replaced it with a new steel one, they then installed (4) SmartJacks in to support the beam and raise the sagging floors.  The SmartJacks were installed and adjusted to raise the beam and support the floors.  The home is now stabilized and the floors that were once sagging are no longer an issue. The homeowner is very pleased with the work completed and would recommend Saber to anyone with foundation issues. 

Ms. Mitchell, a resident of Palmdale, California, had noticed cracks inching along the upper walls of her home, as well as cracks in her footings. She knew that these were symptoms of soil settlement or foundation problems and wanted to make sure that her foundation was stable and level. After researching to learn the best way to remedy her situation, she contacted Saber Geotechnical Construction Solutions.

After calling Saber, the team met with Ms. Mitchell and agreed to install 7 push piers to stabalize her foundation; 3 inside her garage, 3 along the side of the home, and one in the rear.

In order to install the piers, concrete needed to be removed. After push pier installation was completed, Saber took great care in repouring and replacing the concrete.

Ms. Mitchell left us a glowing review and appreciated the hard work and due diligence of Manager Trevar Akins, Foreman Alvin Rodriguez, and team members Dimitri, and Mike. She stated 'It almost looks like it was never touched. Thank you for keeping me in the loop on the job progress and showing up on time.'

Saber Foundation was called to a home in Hawthorne, CA to inspect and evaluate major cracks both within and along the outer walls of the stuccoed home. After inspection, it was determined that about 3/4 of the house was experiencing major settlement.

The raised foundation contained numerous cracks and all existing post and pads were in terrible shape. When Saber's piering team arrived, they got right to work.

First, post pads were installed, backfilled, with concrete poured back. One special twist for this job was that the homeowner and family were able to leave their mark on their home by leaving handprints in the newly poured concrete. Next, the team removed and replaced 12 post and pads in the crawlspace and installed AC post caps on all posts. In order to install part of the piers, the team had to remove and put back a part of the patio deck.

Saber was able to alleviate this family's foundation problems by halting any further settlement on 2/3 of the home and reinforced all beams underneath the domicile. The clients were super happy throughout the process.

Saber received a call from a homeowner experiencing water drainage problems. The water in his backyard wouldn't drain properly due to an underground spring. Puddles kept building in the yard near his neighbor's yard.

Upon arrival with his team, foreman, Angel Morales, saw that puddles were building up near a wall in the yard. Lots of mud and water had built up. In order to fix the problem, french drains were installed against the neighbor's wall, where most of the standing water was. The drain was connected to a preexisting drain in order to redirect the water into the street.

Saber helped this property by ridding it of puddling water by directing through the main drain into the street.

A homeowner in Pomona was experiencing telltale signs of foundation settlement. He observed cracks on the interior and exterior walls of his home. After initial inspection and diagnosis, foreman, Joe Delgado, and his team were dispatched to help right the problem. They were tasked wtih installing 5 helical piers to fix the settling problem and installed push piers inside the homeowner's crawlspace.

Each of the 5 helical piers were placed in holes 6 feet deep at strategic locations on the property. Once installed, they were welded in place. Saber successfully installed all product and fixed the homeowner's problem by halting further settlement of the home and increasing stability.

A Sylmar resident was having a problem with uneven slabs on his patio and pool deck. He had heard of Saber and it's stellar online reputation for giving honest imspections and providing reasonable estimates for the right fix.

Upon observing the customer's problem, a Saber Project Design Specialist determined that an application of Polylevel would be the best way to level his slabs without intrusive grinding or concrete replacement. 

After Saber's production crew came out to meet with the customer and explain the process of the tailored solution, the PolyLevel was applied through discreet holes in the slab (which were then patched over). Within a short amount of time, the slab was ready to walk upon and the customer was delighted with the final results. He stated that now he could entertain without worry of injuries from tripping or ugly concrete.

A building off of North Brand Blvd. in Glendale had daily problems. Employees had trouble opening and closing doors due to a sunken foundation due to poor soil conditions. Once Saber had determined teh right fix, Foreman Rick Whitehead and his crew were called in beginning on November 12th. Rooms 1080 to 1085, 1041 to 1043 and the areas surrounding them were the main focus.

Visible signs that future problems would occur included large gaps between baseboards and the slab as well as spaces between partition walls and the dropped ceiling. Without PolyLevel structural damage to the upper level of the building would be inevitable. Further foundation damage, cracking and sinking slabs, and trip hazards in lower level high traffic areas would occur. Doors and walls would also need replacement.

In the beginning of the project, carpet tile was removed in a 4X4 space so taht Rick and Jacob could have access. Windows were also removed in a central location for rooms 1080 to 1085 and 1041 to 1043 and their areas. This was for easy access of the crew's hoses. Holes were drilled through the slab in the sectioned off areas while a shop vac was used to prevent dust. Ports were placed in each hole and PolyLevel was carefully injected under close observation. The Saber team monitored the slab elevation before, during, and after elevation. After PolyLevel was applied, all areas were cleaned and crews replaced the carpet tile and the windows.

Saber's services fixed the office building's foundation issues by bringing the foundation within a half inch of level and fully stabilized. All doors within open, closed, and latched with ease. Gaps between baseboards and the slab were closed completely. Any gaps between the walls and ceiling were also closed. The customer and their team were very satisfied and pleased. They especially took interest in the PolyLevel application and process, which was deemed a complete success!

A family in Covina called Saber when they found that they needed to take action on their settling pool deck. They wanted their pool to look level and cleaner for the next summer season. After Saber came out and determined that PolyLevel was the best fit for the problem, a crew was dispatched to fix the concrete without removing and replacing the slabs.

Inconspicuous holes were bored into key areas in the pool deck and the slab elevations were closely monitored as PolyLevel was injected. Saber's crew was able to level the customer's pool deck quickly. The homeowners were very pleased with the results and how simple the solution and process was. They commented on how Saber's crew left their yard and pool area cleaner than it was before they arrived!

A Lakewood homeowner called Saber to help lift his settling foundation. Doors wouldn't close and there were interior and exterior cracks on the walls. Upon the project design specialist's recommendation, the homeowner decided to move forward with the piering process. 

Along with installing piers to lift the home, Saber placed rebar reinforcement along with new concrete. The home was lifted to maximum practical recovery and the homeowner was very pleased with the results. All doors functioned after the project was complete, as well.

A La Puente homeowner discovered cracks in their raised foundation beneath their home and needed help. To prevent further damage to their home, the family called Saber and a project design specialist was dispatched to the home. Upon observing the severe cracks in the concrete foundation, the project design specialist determined that crack stitching using rebar stapling would be the most effective long term solution.

Once the concrete repair production crew at Saber arrived, the repair commenced seamlessly. The cracks were sealed and reinforced with galvanized steel Simpson Strong Tie straps along the top and bottom of each crack, bolted securely. The homeowner was pleased with the results of the repair and felt that their foundation was safe from worsening of the cracks.

A condominium community in Canoga Park received a free property walk through and evaluation from Saber. They had called because a few of their walkway slabs of concrete were uneven, creating trip hazards for their residents.

Saber found quite a few trip hazards within the condominum property and advised that the concrete should be ground down to create a smoother surface. The owner of the complex agreed to have the services done within the following two weeks. 

Once Saber's commercial grinding crew arrived, it only took a few days to efficiently and dustlessly grind down the trip hazards on the walkways in the community. The owner was pleased with the results, stating that the grinds were seamless and made the property look like new!

A homeowner in Alhambra wanted to schedule a fix for her sagging floor during the beginning of the new year of 2015. She gave Saber a call for an inspection before she left for her holiday vacation in 2014. She desired an affordable fix for the sagging floors in her home. Her home value had decreased and she needed to improve the selling price if she decided to put it on the market. 

Upon inspecting her home, including the crawl space below her home, Saber's project design specialist determined that SmartJacks were the best solution to reinforce and support the flooring in her home. Saber's production crew was dispatched once an appointment could be made, convenient with the homeowner's return from her holiday vacation.

Along with the SmartJacks, a girder beam was also installed beneath the floors to provide added support. Shims on the interior stem walls were installed as well as a wooden post with a strap. The homeowner also decided to lift the concrete walkways around her home with PolyLevel.

Once the work was completed, the homeowner stated she was pleased with the results. Her property looked newer, with the leveled concrete, and the floors on the lower level of her home were no longer sagging. Doors closed easier, too.

A Rosemead family had noticed that their floors were slanted and many doors and windows in their home couldn't or wouldn't close easily. In September of 2016, they reached out to Saber for a free inspection of their foundation and an estimate on how much it would cost to fix their problems.

Upon visiting the property, our project design specialist determined that the home needed to be leveled. The homeowners let him know that previous foundation work had been done to the house and understood that Saber would have to make changes to it in order to secure the home. 

During March of 2017, after testing the soil and engineering was completed, Saber's production team inserted 12 push piers in key areas around the house, and was able to lift the home to its original level, straightening doorjambs and window frames. The family was very happy with the results and noted that even though it was a huge project, the team was transparent and kept them up to date with the progress of the work. 

A homeowner in Woodland Hills, CA had finally had enough of their too small basin for their sump pump. With the sufficient rains that had been falling in the area, he found that it overflowed into his crawlspace and eventually, the pump itself died. A musty odor began to come up through the house and, when the weather dried, bugs and other creatures were attracted to the moisture under the home.

Upon calling Saber, a project design specialist came out to perform a full home inspection. Upon inspecting the crawlspace, it was found that a SmartSump would be the perfect solution to the problem. It was also noted that a SmartPipe 7.5 was required to help further the solution of the homeowner's wet crawlspace problems. Once the production crew came to perform the services, the task only took one day to complete. 

The homeowner was happy with the results and finally had an operating sump pump again. His crawlspace is now dry and free of flooding rainwater whenever it rains.

A homeowner's association in San Pedro needed immediate help with a concrete walkway problem at one of their communities in San Pedro, Ca. Many of the concrete slabs making up the community walkways were cracked or uneven. Residents were tripping and the unsightly damaged concrete made the property look old and unkempt.

After walking the property, Saber's trained concrete specialist determined that concrete grinding would be the best solution for most of the communities problems. Of the slabs, only a few needed complete removal and replacement.

Over the course of 6 days, Saber's grinding foreman came out to grind down 89 misaligned (uneven) joints between slabs. Saber took the time to be sure all concrete was leveled with little disruption to the community's residents. 

After the grind, Saber's concrete crew arrived to remove and replace 270 sq. ft. of concrete throughout the large community. Upon completion of the project, the job site was cleaned and the HOA and property manager were able to walk the property with the foremen to ensure they were pleased with the results. Now, residents and their families could live in a community free from uneven concrete trip hazards and feel a sense of pride in where they live.

A home in San Pedro, Ca., built in the 1940s was in dire need of a lift. The homeowners had been living there since 1999 and over the past year and a half, noticed cracks along their doorways as well as on the walls. on the exterior of the home, the foundation had begun to crack and fall apart. Safety had become a concern for the family, and they wanted a solution to stop any further damage to their home. After getting estimates and solution options from a few contractors, they chose Saber and their permanent solution to fix their home.

Because the home had experienced about .5" of soil settlement, seventeen 1'-3' SmartJacks were needed along with 124 feet of steel support beams in order to stabilize the sagging floors above their crawlspace. Six Hydraulic push piers were also inserted along the outside of the home in order to lift the foundation to maximum practical recovery. Without these services, the home was guaranteed to continue to sink, jeopardizing the stability of the home itself.

A community church was in need of improving the safety of their parishioners. Various trip hazards had developed over the years on the property's walkways, stairways, and in other areas. They also wanted to eradicate unsightly cracks and improve the look of their church's landscape. 

Saber was called in for a free inspection of what it would cost to grind down the trip hazards. There were found to be 11 areas needing to be leveled out through dustless grinding. They included the walk paths, an area at the top of the main stairs, in front of the base of the stairs, as well as alongside a city sidewalk bordering the property. 

The project only took a day to complete and didn't cause the disruption of any services or other events. The church's staff appreciated the efficiency of the project and appreciated that their parishioners were much safer from trip and fall risk. This seemingly small change to the property provided a much-needed facelift and improvement. 

A homeowner in Whittier, Ca. had noticed soil erosion and other symptoms of foundation and soil settlement beneath an exterior support column on his porch. He called Saber for a solution that would keep his home from sinking any further. After the initial inspection of the column's location, a single 288 Helical Pier Standard with a mechanical bracket was deemed the correct solution for the issue the home was having. A steel beam was also to be inserted directly below the base of the column for further reinforcement.

Once reviewing the plans, the foreman of the team to complete the job went over the details of the job, the length of time it would take and the expected results. Concrete removal and soil excavation was done by crew support to prepare for the insertion of the helical pier. The pier was inserted through the soil until it reached load bearing strata. Rebar was dowelled into the existing concrete slab and set in place with two part epoxy. The 2" X 6" steel beam was then added. The crew backfilled the soil at the helical's location and the soil was securely tamped down.

After the job was completed, the foreman went back over the finished job with the homeowner and everything proved satisfactory to the homeowner, including the job site cleanup and the final result of a permanently stabilized column.

An Avila Beach, Ca. home, built in 2002, withstood an earthquake in 2004. The current homeowner had just bought the home and had only lived in it for 2 months. Cracks in the drywall on the interior of the home had been noted before they purchased the home. The family planned on living in the home for quite a while but wanted their foundation issue fixed for a future sale date in the decades to come.

Saber conducted a free foundation inspection and determined that the foundation was sinking in one area due to settling soils. The sinking area was causing the walls to crack and it was found that, if not remedied, the symptoms would only get worse with time. The homeowner's goal was the permanently stabilize the slab foundation to prevent further settlement.

A 3" helical pier and tieback with a standard bracket was used to lift and stabilize the foundation. Many of the cracks in the interior walls of the home were closed upon lift of the home and the homeowner was pleased with their results.

Downey resident Jose Luis G. contacted Saber about cracks in his garage floor and walls. He also stated that the garage door wasn't closing evenly.

After inspecting the garage, Saber used their state-of-the-art PolyLevel process to raise the concrete slab in the garage. Then, with the level garage floor we caulked the existing cracks.

Jose Luis was satisfied with the result and with our clean-up when we finished the job.

La Mirada resident Billie H. called Saber about a patio that wasn't level. Standing water would appear against the foundation of the house and the garage after it rained.

After inspecting this situation, Saber used our state-of-the-art PolyLevel Process to level the low spot on the patio.

Billie was satisfied with the leveling result. She also was satisfied with the clean-up when this job was completed.

Calabasas resident Norman S. contacted Saber regarding his patio deck. Dan Froehlich provided a complete evaluation.

The job foreman and his crew were able to correct the creeping downward slope of the patio using helical and push piers.

Norman S. was satisfied with the results and the cleanup.

Carson resident Jed E. contacted Saber about foundation problems with his home. Project Design Specialist Jeffery Estes gave a full evaluation of the home.

The project foreman, and his crew, removed the old cracked concrete and paver slabs. New push piers were installed. New higher-strength concrete was poured, and the pavers were replaced.

Jed E. was happy with the job result and cleanup.

Altadena resident Julie O. contacted Saber regarding possible foundation issues with her home. Dan Froehlich performed a complete foundation evaluation.

Julie's home had no foundation issues. Dan did recommed seismic retrofitting and two new crawlspace doors. Our crew finished this work in one day. 

Julie was satisfied with the completed job and the cleanup.

Compton resident Boris M. contacted Saber regarding his home's foundation. Project Design Specialist Jason Sparks provided a full evaluation of the home.

Several of the footings within the crawl space were showing signs of erosion. Our crew was able to replace these footings with pre-cast concrete pads, new support posts and caps. This job took one day for our crew to complete.

Boris was satisfied with the finished job and the cleanup.

Culver City resident Valle A contacted Saber regarding cracking in his home driveway. A Saber project design specialist performed a complete evaluation.

The soil under the driveway was unstable. Our crew, using the Saber state-of-the-art PolyLevel soil stabilization corrected this situation. 

Valle was satisfied that this situation has been corrected and will not get worse in the future. Valle also liked the post-job cleanup.

Gardena resident Jim P contacted Saber when he noticed settling cracks in the front bedroom of his house. Moisture was also present under the house. Product design specialist Jason S did a complete inspection and reported his findings.

After the leaking sewer line was repaired, Saber replaced the pads,old wood posts,and caps in the crawl space. We also used smart jacks to stabilize Jim's house.

Jim was happy with the results and the clean up.

La Canada / Flintridge resident Tim M contacted Saber with concerns about cracks in the outside stucco walls of his home.

Our project design specialist provided Tim with a full evaluation.

Our crew was able to stabilize Tim's foundation using push piers and brackets.

Tim was satisfied with the result and clean up.

Lawndale resident Charles C contacted Saber when he noticed some cracking in his home foundation. 

Our project design specialist performed a complete evaluation. Parts of the foundation were sinking.

Using a push pier system, the Saber crew was able to lift the sinking parts of the foundation. Charles was satisfied with his entire foundation being stabiized and the clean up after the job was finished.

Monterey Park resident Robert H contacted Saber regarding cracks on the exterior wall of his home.

Our project design specialist, Jason Sparks, performed a complete evaluation of Robert's home.

Our crew was able to stabilize the foundation of the home by using smart jacks in the crawl space. Robert was satisfied with the result of this work and the clean up.

Norwalk resident Geraldine B contacted Saber in regards to foundation issues with her home.

Our project design specialist performed a thorough inspection and provided Geraldine with his evaluation.

Our project foreman Nathan Stephens and his crew repaired the foundation. Geraldine was happy with the job result and the clean up.

Inglewood resident Grace F contacted Saber about doors sticking in her home. our project design specialist performed a full evaluation of the home.

Our crew used Smart Jacks with concrete bases to level the home's foundation. grace approved of the work and the clean up.

Temple city Resident Ben O contacted Saber regarding foundation issues with his detached garage. Our project design specialist performed a complete evaluation.

We were able to fix the garage foundation issues by using push piers. Ben was happy with the results.

Wilmington resident Boris T contacted Saber regarding cracks on the walls of his home. He also stated that the doors were sticking. Our Project design specialist performed a complete evaluation.

Our crew used a helical pier system to stabilize the foundation of their home. Boris was satisfied with the job result and the clean up.

Redondo Beach resident Mardi R. contacted Saber. She said , "We were sitting in the living room one evening. We heard loud popping and cracking sounds. We discovered that the floor tiles had buckled. We pulled off the tiles and found that the slab had a crack in it."

Our Project Design Specialist inspected the crack in the concrete slab, and then performed a full evaluation of Mardi's home. There was a void under the slab, which in turn had weakened the foundation.

Our crew used Saber's State-Of-The-Art Polylevel process to fill the void. We then attached Push Piers to strengthen the foundation of this home.

Mardi approved of the work and was happy with the clean up.

Tujunga resident Leo H contacted Saber, wanting to make the CrawlSpace of his home into usable storage space. Our Project Design Specialist performed a complete evaluation of Leo's home.

Our crew removed some dirt to make this space more accessible. We then lined the basement with CleanSpace plastic.

Leo approved of the finished job and the clean up.

West Hills resident Jacob C. contacted Saber regarding cracks in the walls of his home. Our Project Design Specialist did a complete evaluation of Jacob's home.

Our crew leveled the slab using Helical Piers. We then filled the void space beneath the slab by using our PolyLevel process.

Jacob approved the finished job and clean up.

San Marino resident Claire T. contacted Saber about her patio cement slab being uneven. Our Project Design Specialist completed a full evaluation of the home and the patio.

Our crew used the Saber PolyLevel Injection process to fill the void, and lift the sinking part of the patio. Claire was then able to put a structure on the patio.

Claire was satisfied with the result and the clean up.

Burbank resident Mitzi C. contacted Saber in regards to cracks in the walls of her home. She also told us that her window and doors were sticking. Our Project Design Specialist conducted a thorough inspection of Mitzi's home.

Our crew replaced deteriorating wood support posts with new metal Smart Jacks. This leveled and strengthened the foundation of Mitzi's home. Our picture shows the Smart Jacks.

Mitzi was happy with the result and the clean up.

Claremont resident David N. contacted Saber inquiring the Earthquake Brace and Bolt promotion offered by the state of California. Our Project Design Specialist performed a thorough inspection of David's  home.

Our crew installed Seismic Retrofitting Universal Foundation Plates and A35 Framing Angles to strengthen the foundation of David's home.

David was happy with the end result and the clean up.

Huntington Park resident George C. contacted Saber regarding his apartment complex where the back side hangs off of beams. The beams were sagging and cracking the walls upstairs in the back corner of the complex. Our Project Design Specialist performed a complete evaluation of George's property.

Our crew installed 5 new posts with poured concrete bases. 

George was happy with the result of the job and the clean up.

La Verne resident Brad C. contacted Saber regarding a trip hazard where the sidewalk met his driveway in front of his home. Our Project Design Specialist performed a complete evaluation of Brad's home.

Our crew ground the raised concrete slab edge down until it was level.

Brad was happy that the trip hazard was eliminated and that the clean up was done to his satisfaction.

Lake Hughes resident Mary S. contacted Saber regarding her homes tilting brick fireplace creating cracks in the walls. Our Project Design Specialist performed a complete evaluation of Mary's home.

Our crew filled a void beneath the fireplace using our Polylevel Injection Process. Saber then installed Push Piers to level the foundation of the home. The dirt excavation and the Push Pier installation are pictured.

Mary was pleased with the completed job and the clean up.

Manhattan Beach resident Sally S. contacted Saber regarding moisture and standing water in the Crawlspace of her home. Our Project Design Specialist performed a thorough inspection of Sally's home.

Our crew waterproofed the home's Crawlspace by using CleanSpace material. The CleanSpace material is shown in the attached picture.

Sally was happy with the results and the clean up.

Montebello resident Georgia M. contacted Saber in regards to a lot of cracks in the ceiling and around the door frames of her home. Our Project Design Specialist conducted a thorough inspection of Georgia's home. The floor and the foundation of her home were sinking.

Our crew supported the Crawlspace beams with all metal Smart Jacks. Saber also used Push Piers to lift and support the foundation of Georgia's home.

Georgia was happy with the results and the clean up.

Pacific Palisades resident Robert C. contacted Saber in regards to the State of California Earthquake Brace and Bolt (EBB) promotion. Our Project Design Specialist performed a thorough evaluation of Robert's home.

Our crew added a Steel Cross Beam and all metal Smart Jacks in the Crawlspace. seismic strengthening Universal Foundation Plates and A35 framing angles were also installed.

Robert was happy with the completed job and the clean up.

Pico Rivera resident Ron V. contacted Saber regarding protecting his home against earthquakes. Our Project Design Specialist did a thorough evaluation of Ron's home.

Our Crew installed several Universal Foundation Plates and A35 Framing Angles, thus protecting Ron's home from future earthquakes.

Ron was happy with the completed job and clean up.

San Fernando resident James S. contacted Saber regarding the cracking floors and walls in his home.

Our Project Design Specialist completed a thorough evaluation of James's home.

Our crew excavated holes and attached Push Piers to the base of the foundation. This lifted the foundation and leveled James home.

James was satisfied with the end results and the crew clean up.

San Gabriel company Landmark Corporation contacted Saber regarding trip hazards in their concrete parking lot. Our Project Design Specialist completed a thorough evaluation of the property.

Our crew used Saber's State-of-the-Art to level the uneven cracks in the parking lot. We then caulked the cracks.

The company was happy with the completed job and the clean up.

South Pasadena resident Adam J. contacted Saber regarding cracks in his concrete foundation. Our Project Design Specialist conducted a thorough inspection of Adam's home. Part of his foundation was sinking.

Our crew dug holes and attached Push Piers to Adam's home. The picture shows an attached Push Pier lifting the foundation to make it level.

Adam was pleased with the completed job and the clean up.

Valley Village resident Joe C. contacted Saber regarding the Earthquake Brace and Bolts promotion offered by the State of California. Our Project Design Specialist performed a thorough inspection of Joe's home.

Our crew installed Universal Foundation Plates to connect the foundation to the home's mudseal. Then the crew installed the A35 Framing Angle that connects the mudseal to the house. 

Joe was happy with the finished project and the clean up.

Chatsworth resident Frances R. contacted Saber about moisture issues she was having in her home's crawlspace. Saber's Project Design Specialist performed a inspection of Frances' home.

Saber's crew installed Cleanspace Vapor Barrier over Drainage Mats. This took care of the moisture issues that Frances was having. Frances was happy with the finished job and clean up.

West Hollywood residents Eva and Andy S. contacted Saber about strengthening a foundation of a home that was torn down and being rebuilt. Saber's Project Design Specialist performed a complete inspection.

Our crew excavated holes in the foundation. Saber then installed Helical Piers to strengthen the foundation.  Eva and Andy were happy with the result and the clean up.

The picture shows a installed Helical Insert.

Sunland resident Dylan M. contacted Saber regarding cracks in the exterior wallss of his home and trip hazards on the walkways. Saber's Project Design Specialist conducted a thorough inspection of Dylan's home.

Our crew used the PolyLevel Injection Proceess to fill the voids created by shifting soil under the walkways and foundation. This process strengthened the home foundation and eliminated the trip hazards.

Dylan was happy with the results and the clean up.

The attached picture shows a exterior wall crack that Dylan's home has on it.

Los Angeles resident Neil contacted Saber regarding "sinking floors" in his home. He had safety concerns regarding his home. Saber's Project Design Specialist performed a thorough inspection, evaluation, and quote. The home's foundation was weak and there weren't enough support posts under the sagging and sinking floor.

Saber's crew used our PolyLevel Process to raise the foundation. We then used Push Piers to strengthen the foundation. Last of all we installed all metal Smart Jacks in the crawlspace, to correct the floor issues in Neil's home.

Neil was happy with the completed job and the resulting clean up.

Los Angeles resident Dennis contacted Saber regarding trip hazards in the concrete in his patio and garage floors. Saber's Project Design Specialist performed a thorough inspection, evaluation, and quote.

This home had a weakened foundation caused by settling soil. Our crew used Saber's PolyLevel Process to fill the voids, and help level the foundation. We then used Push Piers to strengthen the foundation. Last of all, we used the Nexus Plus system to prevent any of the floor cracks from expanding.

Dennis was happy with the final result, and our crew's clean up.

The attached picture shows the garage floor after the PolyLevel Process and the Nexus Pro Process.

Sherman Oaks resident Mike contacted Saber regarding getting his home, built in 1960, Seismic Retrofitted. Our Project Design Specialist performed a free homeowners inspection and quote.

Saber's crew installed several Seismic Retrofitting Universal Foundation Plates and A35 Framing Angles. These installed components strengthened the bond between Mike's home and it's foundation. Mike was satisfied with the completed job, and our crew's clean up.

San Gabriel resident George contacted Saber concerning cracked concrete walkways, and sagging floors in his home. He also wanted to check into seismic retrofitting his home. Saber's Project Design Specialist performed a free, complete homeowners inspection. The specialist then provided a detailed quote.

Saber's crew used our PolyLevel Injection Process to stabilize the soil and fill voids under George's home. We then excavated holes and attached Push Piers to the base of the home's foundation. These two actions significantly strengthened the foundation of George's home. Saber's crew also attached Seismic Retrofitting components to strengthen the home's connection to it's foundation. Last of all, our crew installed Metal Crossbeams and All Metal Smart Jacks to level the sagging floors of George's home. This is shown in the attached picture.

George was happy with the results. He was also very pleased with the clean up that Saber's crew performed, each day when they finished working.

Palmdale resident Jalmet contacted Saber regarding bad crack issues in his garage floor. Saber's Project Design Specialist performed a free homeowner inspection.

Replacing the concrete in the garage would not have fixed this issue. The shifting soils were causing the garage foundation to weaken and shift. Our crew excavated holes that exposed the base of the foundation. We then attached Helical Piers. The holes were filled in and work area was cleaned up. These Foundation Piers not only strengthen, but provide long term stability to the home. The attached picture shows a installed Helical Pier.

Jalmet was happy with the result.

Rancho Palos Verdes homeowner Stephen was referred to Saber by a previously satisfied customer. He wanted to sell his house, and noticed soil movement under his home's deck. Saber's Project Design Specialist performed a free homeowners inspection and quote.

Our crew cleared the area under the deck. The voids were filled using our PolyLevel Injection Process. We then attached Push Piers to strengthen the home's foundation. Posts were added under the deck for stabilization. The attached picture shows this work in progress.

Stephen was satisfied with the completed work, and happy with our clean up.

Mission Hills resident Alan contacted Saber regarding Seismic Retrofitting his home built in 1953. Saber's Project Design Specialist performed a complete, and Free Homeowner inspection .

Our crew attached over one hundred Universal Foundation Plates and A35 Framing Angles. These components have Strengthened Alan's home structure to it's Foundation. The attached picture shows two of these installed units.

Alan was very satisfied with the result. He was also pleased with the crew's clean up.

Saber was contacted by Matt regarding being used as a Sub -Contractor. The Foundation Slab, of the Government Building, had voids under it from settling dirt. Saber's Project Design Specialist completed a full evaluation of this work site.

Our crew drilled holes in the concrete slab where the voids had formed. The Saber used our State- of- the- Art PolyLEVEL Injection Process to fill the voids. This lifted the areas of the slab that had sunk. The attached picture shows a Saber crew member Injecting PolyLEVEL.

Matt was satisfied with the results, and was able to move forward with the project.

Van Nuys resident Larry contacted Saber. He was concerned about safety issues of his home, that he wants to live in "for the rest of my life." Larry had noticed cracks appearing in the structure and asked specifically about Seismic Retrofitting. Saber's Project Design Specialist performed a complete and free Homeowner inspection.

Our crew attached over one hundred and fifty Seismic Strengthening components to Larry's Home and Foundation. The attached Picture shows three different components. The Universal Foundation Plate is attached to the A35 Framing Angle, and the Corner Braces are also pictured. These components Strengthened Larrys Home connection to it's Foundation.

El Segundo resident Jack contacted Saber regarding his home, that was built in 1930. There were cracks in the Foundation, Sagging Floors, and he noticed his house was smelling musty. Saber's Project Design Specialist performed a complete, free Homeowner inspection of Jack's home.

Our crew excavated holes and installed Push Piers to the base of the foundation of Jack's home. This strengthened the home's Foundation. We also installed Seismic Universal Foundation Plates, A35 Framing Angles, and braces to strengthen the connection between the Home and it's Foundation. The attached picture shows a installed Push Pier strengthening a cracked portion of the Foundation.

Jack was satisfied with the completed improvements and clean up

Los Angeles resident Sara contacted Saber regarding sagging floors and in her rental property. Saber's Project Design Specialist performed a thorough inspection of Sara's home.

Our crew removed dirt and other debris from the home's Crawlspace. Then new Cross Beams were added to strengthen the existing beams. Our crew then installed proper wood support posts with concrete bases. Last of all, Saber's crew strengthened the posts and home to it's foundation by installing Seismic Retrofitting Plates, Angles, and Brackets.

Sara was happy with the result and the clean up after this work was performed.

La Crescents- Montrose resident Bernie contacted Saber regarding Seismic Retrofitting his 1958 home. Saber's Project Design Specialist performed a Free and thorough homeowner inspection of Bernie's home.

Our crew installed over one hundred Seismic Retrofitting Universal Foundation Plates and A35 Framing Angles. These added components Strengthened and Solidified Bernie's home to it's Foundation. The attached picture shows these 2 components after they have been installed.

Gardena resident Ruth contacted Saber in regards to cracks in the walls of her home. She stated that the cracks were getting larger. Saber's Project Design Specialist performed a thorough and Free homeowner inspection. The home's Foundation was settling due to shifting soils. This was creating a uneven sinking, causing the walls to crack.

Our crew excavated holes next to the sunken parts of the foundation. We then installed Push Piers to the base of the home's foundation (attached picture). The Piers were pressurized, thus lifting these sunken parts of the foundation. This corrected the issue, that Ruth was having. 

Ruth was happy with the results and the crew's clean up.

Torrance resident Olivia contacted Saber regarding cracked dry wall, exterior walls, and walkways on her home. She was concerned about the safety of her home. Saber's Project Design Specialist performed a thorough inspection of Olivia's home.  The cement walkways had areas that needed to be removed and replaced. Her home's foundation was also sinking do to shifting and settling soil.

Saber's crew removed areas of the concrete walkway that needed to be removed. We also dug up cement, excavated holes, and installed Push Piers to give the base, of the foundation a consistant elevation. Our crew, then filled in the holes, replaced the concrete that was removed, and applied Nexus Plus to fill the existing cracks. The attached picture shows the replaced concrete, where Push Piers were installed to the foundation.

Olivia was happy with the result, and pleased with the clean up.

Pomona resident Alfred contacted Saber regarding cracks in the interior and exterior walls of his home. Saber's Project Design Specialist performed a complete and free homeowner inspection. The Specialist found voids under the Foundation caused by shifting soils. These voids had caused the home's foundation to weaken and sink in spots.

Saber's crew filled the voids using Saber's PolyLevel Injection Process. We also excavated holes and attached and pressurized Push Piers to give the foundation a consistant elevation. The attached picture shows a attached Push Pier. Then we filled in the holes and poured cement.

Alfred was happy with the results, including the crew's clean up.

Torrance resident Eddie contacted Saber regarding sagging floors in the home he wanted to sell. Saber's Project Design Specialist performed a complete inspection. The crawlspace needed steel reinforcement beams attached to the existing floor joists, and more support post needed to be added.

Saber's Crew attached the Steel I Beam to the floor joists. Then Smart Jacks were installed, and the sagging portion of the floor was lifted to a consistant elevation throughout the home. The attached picture shows the installed I Beam and Smart Jacks.

Eddie was very satisfied with the results and the clean up.

Jim from Pasadena Covenant Church contacted Sabre regarding the safety of the floors in the church. The Church Board was also concerned. Saber's Project Design Specialist performed a complete inspection of the building. The crawlspace had improper support for the floor of the church. some of the older support posts were starting to tilt and fail.

Our Crew attached Steel I Beams to the existing Joists. Then new cement pads were poured and all Metal Smart Jacks were installed. The attached picture shows the completed work. These two components made the floor elevation consistant throughout the church. The floor was also Stabilized.

Past or Jim and the church board were satisfied with the completed work, and the crew's clean up.

Torrance resident Marco contacted Saber regarding cracks in the walls of his home. He was concerned, because the cracks were growing over time. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection. The soils had shifted beneath concrete deck of Marco's home. This had caused voids to form, cracking the deck, and thus weakening the home's foundation.

Saber's crew drilled holes through the concrete with the voids beneath them. We then injected PolyLevel into the voids. This lifted the sunken part of the concrete slab and foundation. This stoped all cracks from further growth. The Foundation was now Strengthened and Stabilized.

Marco was happy with the result of Saber's work.

Los Angeles resident Karen contacted Saber regarding sagging floors in her home. Saber's Project Design Specialist performed a Free Homeowner inspection. The 1938 home was starting to show signs of slipping on it's foundation.

Saber's Crew replaces some of the floor wood support posts. We also attached several Seismic Retrofitting Components to strengthen the home's connection to it's foundation. The posts solved the sagging floor issue, while the Seismic Retrofit components p[revented the home from slipping on it's foundation.

Karen was happy with the results, and the crew's clean up.

Covina resident Daniel contacted Saber regarding work he has done by us in 2014. The soils were continuing to shift and form voids. This was again weakening the foundation of his home.The attached picture shows a support post that is seperating from the concrete base. Saber's Project Design Specialist thorougly inspected the foundation. 

Saber's crew corrected the cracks that were newly formed using our PolyLevel Injection Process. The cost was covered under the original warranty. Saber stands behind it's products and it's work.

Daniel was happy with the outcome.

Woodland Hilld resident David contacted Saber regarding cracks that were appearing in the ceiling of his home. He stated that he'd lived in his home for 40 years. Saber's Project Design Specialist performed a free, and thorough Homeowner inspection. The soils had shifted under David's home, thus weakening the Foundation.

Our crew excavated holes next to the weakened areas of the Foundation. Next, they attached Push Piers to the base of the Foundation, and pressurized them. These Push Piers lifted the parts of the Foundation that were sinking. They also gave the entire Foundation consistant elevation. This stopped the cracking in the ceiling, and gave David and his wife, peace of mind.

Los Angeles resident Virginia contacted Saber regarding sloping and sagging floors in her home. Saber's Project Design Specialist entered the home's Crawlspace, and immediately noticed old wood floor joists, and tilting and deteriorating wood support posts. 

Saber's Crew installed new steel I Beams to support the Floor Joists. Then we installed all metal Smart Jacks to eliminate the sagging issue. Our crew also removed excess dirt and debris that had been replaced in the Crawlspace.The attached picture shows one of these I Beams and Smart Jacks after installation.

Virginia was pleased with the results and the clean up that occurred each day when the work was done.

Sheman Oaks resident Edgar contacted Saber regarding his home remodel room addition. The remodeled part of the home had floors that were sinking. Saber's Project Design Specialist performed a thorough and Free homeowner inspection. We discovered that areas of the Add On Foundation were sinking, creating voids udder the room that was added.

Saber's crew excavated holes and installed Push Piers to the sinking areas of the Foundation. These Piers lifted the areas that had sunk. Then we used Saber's State-of-the-Art PolyLevel Injection to fill the void under the low spots of the floor. The attached Picture is a installed Push Pier Lifting, Stabilizing, and Strengthening Edgar's Foundation.

Now both the inside and the outside of Edgar's home are at a constant elevation.

Los Angeles resident Alora contacted Saber regarding cracks in the Crawlspace walls of her home, that was built in 1920. Alora stated that she had lived in the home 30 years. Saber's Project Design Specialist performed a thorough and Free Homeowners inspection. The Crawlspace walls were cracked and the Foundation's connection to the Home needed to be Strengthened.

Our crew strengthened the cracked walls by adhering Wall Sheathing to them. Then our crew attached Universal Foundation Plates and A35 Framing Angles to greatly strengthen the connection between the Home and the Foundation.The Attached Picture shows these two components.

Alora was happy with the result, and the clean up when the work ended.

Torrance resident Lenore contacted Saber regarding a newly installed Block wall, that was leaning, and had gaps. Saber's Project Design Specialist performed a Free Homeowner inspection. The wall didn't have the Proper Tension to hold it together, and make it Safe.

Our Crew dug trenches to properly Strengthen and Stabilize the wall. The attached picture shows a Saber crew member during this process. Then Tieback Tensioning Plates were installed on both sides of the wall. The wall tension was then adjusted to Strengthen and Stabilize this Block Wall.

The Homeowner was happy with the result and the ensuing clean up.

Los Angeles resident Geraldine J. contacted Saber regarding earthquake preparation of her home in Los Angeles. Saber's Project Design Specialist performed a complete and Free Homeowner inspection, of Geraldine's home. The home hadn't had any earthquake retrofit updates since it had been built.

Our crew installed several Universal Foundation Plates, that are shown in the attached picture. We also attached A35 Framing Angles. 

Geraldine's home now meets the California Building Code, by having Saber install these Seismic Retrofitting Components. Geraldine now has peace of mind regarding one of her biggest investments, her home.

Los Angeles resident Donna B. contacted Saber regarding getting her home, built in 1924, Seismic Retrofitted. Saber's Project Design Specialist performed a thorough inspection of Donna's Home.

Saber's crew Attached Cripple Wall Sheathing to the existing walls in the Crawlspace. Having Strengthened the walls, we then installed Universal Foundation Plates, attached picture, and A35 Framing Angles, to Strengthen the home's connection to it's Foundation. 

Donna was happy that her home was now meeting California Building Code to withstand eartquakes.

Huntington Park resident Frank A. contacted Saber about uneven and sagging floors in his home. Saber's Project Design Specialist performed a Complete inspection of Frank's home.

Saber's Crew attached Metal Crossbeams to the existing wood floorJoists.We then installed SmartJacks to lift the sagging areas of the floor.

Frank was happy with the results.

Glendale resident Ella contacted Saber regarding Seismic Retrofitting her home. She has lived in the home for more than twenty years. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection.

Saber's crew installed A35 Framing Angles, and Unviversal Foundation Plates to strengthen the Bond between Ella's home and the Foundation.These two components are shown in the attached picture. Then Seismic Retrofitting Brackets were added, to strengthen the connection of the Floors to the Home.

Ella liked the result and the crew clean up.

Long Beach resident Dave S. called Saber regarding "bouncy floors" in his home. He stated that he had lived in his home since 1975 and that it was built in 1926. Saber's Project Design Specialist performed a Free Homeowner inspection. Dave's home was showing signs of movement on it's Foundation. We also noticed that several of the Floor Support Posts were not supporting Dave's floor anymore. The attached Picture shows one of these posts.

Sabers Crew attached several Seismic RetroFitting components to strengthen the bond between Dave's home and it's Foundation. These included Universal Foundation Plates connecting the Foundation to the Mudseal, A35 Framing Angles Strengthening the connection from the Mudseal to the Home, and Support Post Brackets strengthening the connection from the Posts to the home's floors.

Dave was happy with the results. He had no more floor issues, and his home now met the California Building Code Standards.

Gardena resident Barbara contacted Saber regarding making her home earthquake safe. Her home was built in 1966, and needed to be brought up to the current California Building Code. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection.

Our Crew attached Seismic Retrofit Components to strengthen the home's connection to the Foundation. The Universal Foundation Plates are pictured. These Plates Strengthen the connection of the Home to its Mudseal. We also attached A35 Framing Angles to strengthen the connection between the Mudseal and the home. These components work together to keep Barbara's home from sliding on the Foundation in the event of a earthquake.

Barbara now has peace of mind that her home is safe.

Lawndale resident Lei contacted Saber regarding getting his home ready to sell. There were cracks in the floors and walls. The home was built in 1970 and picture shows some of the structural issues that had developed due to shifting soils. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection. Voids had Formed under the foundation. The had caused the Foundation to sink and crack.

Our Crew excavated holes next to the home. Then Helical Piers were attached to the base of the Foundation. The Piers were pressurized, giving the Foundation a constant elevation. Then holes were drilled through the concrete and the voids were filled with Polyurethane using Saber's State-of-the-Art Polylevel Injection Process. The excavated holes were filled in, and new cement replaced the cement where the holes had been dug

Lei was happy that his home was now in condition to sell.

Whittier resident Larry contacted Saber regarding the safety of his pool deck.Concrete Slabs were sinking and Cracks were forming. Sabers Project Design Specialist performed a thorough inspection of Larry's Home. Voids had dormed under the concrete slabs.

Saber's Crew Drilled holes into the slabs that had sunk. Then the voids were filled with Polyurethane, using our State-of-the-Art Ploylevel Injection Process. Once the slabs were raised, Saber used Nexus Plus to fill and seal the cracks.

Larry was happy that all of the Trip Hazards had been eliminated.

Valley Village resident Joe C. contacted Saber regarding Seismic Retrofitting the home that his parents had lived in. It was built in the 1950's, and Joe wanted to keep the home in the family. Sabers Project Design Specialist performed a thorough inspection of Joe's home.

Our Crew installed Universal Foundation Plates (attached picture) and A35 Framing Angles. These two components strengthen the bond between Joe's home and it's Fooundation. Post caps were also installed, making the connection between the support posts and the floors stronger.

Joe was happy with the results. He now has peace of mind.

Los Angeles resident Rosa D. contacted Saber regarding the cracking Foundation of her home, that was built in 1930. She had started to notice the cracking when her home was remodeled five years ago. Saber's Project Design Specialist found voids under the Foundation during the inspection of Rosa's home. These voids had caused certain parts of the Foundation sink. The weakened Foundation then started cracking.

Saber's crew excavated holes next to the sunken parts of the Foundation. Then we installed Push Piers and Pressurized them. This lifted the areas of the Foundation that had weakened. We also installed Helical Tiebacks, to prevent Lateral movement, of the Foundation in the Future.

Rosa was happy with the finished results.

Torrance resident Hazel G. contacted Saber regarding Foundation issues in her home. She wanted to sell her home, which was built in 1950. Saber's Project Design Specialist performed a thorough inspection and located voids under the the Foundation. Areas of the Foundation were sinking into these voids, which created cracks and weakening.

Saber's crew excavated holes next to the home (attached Picture). Then Push Piers were installed under the base of the Foundation. The Piers were then pressurized, which lifted Foundation. Drainage was installed also, to alleviate standing water issues. Then our crew cleaned up their work areas.

Hazel was happy with the result.

Los Angeles resident Ralph A. contacted Saber regarding Seismic Retrofitting his home which was built in 1939.

Saber's crew installed three different Seismic Retrofitting components in the home's Crawlspace. Post Caps (attached picture). This component strengthens the connection between the floor joist and the support posts. The Universal Foundation Plate, which strengthens the Foundation to the Mudseal. Last of all, we installed the A35 Framing Angle to strengthen the connection from between the Mudseal and the home. These components should prevent Ralph's home from sliding off it's Foundation, in the event of a earthquake.

Ralph now has peace of mind.

Sierra Madre resident Peter L. contacted Saber regarding regarding standing water issues at his home. Sabers Project Design Specialist conducted a Free Homeowner inspection. Voids were found under the concrete patio and the foundation.

Saber's crew filled the voids using our State-of-the-Art PolyLevel Injection Process. We also installed drains. This resolved the standing water drainage issues. The attached picture shows one of the drains that Saber installed.

Peter was happy with the result of our work. He now has peace of mind.

Los Angeles resident Neil S. contacted Saber regarding his floors sinking in his home that was built in 1960. Our Project Design Specialist inspected the Crawlspace of Neil's home. The Floors Support Posts were in the process of sliding off of their concrete bases.

Our crew installed all metal Smart Jacks in the Crawlspace. This lifted the Floor back to it's original height.

Neil was happy with the work that Saber performed. 

Los Angeles resident Maynard K. contacted Saber regarding the sagging floors in his home, that was built in the 1930's. Saber's Project Design Specialist completed a inspection of the home's Crawlspace. The Wood Floor Joists and Posts were aging and starting to deteriorate.

Our crew attached Steel I Beams to the existing Floor Joists. Then we installed all Metal Smart Jacks to lift and support the floors. This gave Maynard's floors constant elevation throughout.

Maynard was happy with the results.

Los Angeles resident Valentin A. contacted Saber regarding a strong earth smell in his home. Saber's Project Design Specialist found, that the home's Crawlspace was wet, when performing the home inspection. 

Our Crew removed debris from the home's Crawlspace. Then we installed a Dehumidifier and a Sump Pump. Then CleanSpace was installed and a new Crawlspace Door was added.

The owner was happy with the results. The odor issue was taken care of.

Los Angeles resident Dennis B. contacted Saber regarding bringing his home up to California Building Code, by Seismic Retrofitting the Crawlspace.

Our Crew installed Universal Foundation Plates (attached picture), and A35 Framing Angles to the home, and the foundation. This strengthened the connection of the home to the foundation.

Dennis now has peace of mind that his home won't slide off of it's foundation during a earthquake.

Los Angeles resident Katy B. contacted Saber regarding a room in her 1923 home that was progressively sinking. Our Project Design Specialist performed a thorough and Free Homeowner inspection. Voids had indeed formed under the Foundation where the room was sinking.

Our crew removed a area of concrete areound the exterior of Katy's home and exposed the large void. The attached picture shows part of this void. Helical Pier Systems were then installed to strengthen and lift the sinking area of the foundation. The void wad filled with Polyurethane to stabilize the home, and stop the void from growing. These two processes gave the foundation back its consistant elevation.

Katy now has peace of mind that her home sits on a solid and stable foundation.

Van Nuys resident Ruth S. contacted Saber regarding drainage issues that she was having. Her home's Crawlspace was wet due to improper drainage. 

Saber's crew installed a drainage system to eliminate this issue. We dug trenches and buried PVC Pipe. We also installed a Catch Basin and a EZ Flo Well.

Now water flows into the Catch Basin, through the PVC Pipe and into the Well. The Crawlspace is dry.

Diamond Bar resident Xin Z. contacted Saber regarding sinking floors in his home. Xin's home is built on a slab. Voids had formed under the concrete slab, causing it to crack and sink.

Saber's crew drilled holes through the flooring and the concrete slab. We then injected Polyurethane into the voids using our State-of-the-Art PolyLevel Injection Process. 

The floors now have a constant elevation, and Xin has peace of mind.

La Verne resident Carrie M contacted Saber regarding cracks in their home foundation. Saber's Project Design Specialist performed a thorough inspection of Carrie's home.

Our crew excavated doles and trenches next to the home's foundation. We then installed steel angles and Push Piers. The Push Piers were pressurized. The attached picture shows the installation before the holes and trenches were filled in, and the area was cleaned up. This lifted the foundation where it had sunk. The cracking stopped.

Carrie now has peace of mind.

The Mira Verde Apartments in Rancho Palos Verdes contacted Saber regarding trip hazards on the walkways within their apartment complex. Saber performed a thorough inspection.

Our Crew ground down the areas of the walkways that had buckled. All areas were smooth when we completed our work.

Management now has peace of mind, that there will be no accidents due damaged walkways.

Monterey Park resident Gary L. contacted Saber regarding Cracking in the walls and walkways. Saber's Project Design Specialist performed a thorough inspection. Voids had formed under the Foundation. This was causing areas of the Foundation to sink.

Our Crew removed concrete and excavated holes where the Foundation had sunk. Then Helical Pier poles were driven into the holes. Brackets were attached. These brackets lifted the sunken areas of the foundation. The holes were filled, and the concrete was replaced.

The homeowner now has a strong and stable home foundation, and peace of mind.

Altadena resident Julie O. contacted Saber regarding Earthquake Retrofitting her home, that was built in 1956.

Our crew installed Universal Foundation Plates, see the attached picture. These plates strengthen the connection between the home and it's foundation. The home is now much less likely to slide off of it's foundation during a earthquake. 

Arcadia resident Mark C. contacted Saber in regards to the Crawlspace of his home.  It was cold and drafty. Saber's Project Design Specialist performed a Free Homeowner inspection of Mark's home. There were too many vents and the Crawlspace door needed to be replaced. We also thought debris removal and CleanSpace insulation would solve these issues. We provided the report and quote. 

Artesia resident Leilanie C. contacted Saber regarding sagging floors in her home. She stated that the home was 100 years old. Saber's Project Design Specialist performed a Free and Thorough Homeowner inspection. The attached picture shows the Crawlspace and the aging crossbeams and support posts. We recommended installing new crossbeams and support posts. We provided the inspection report and quote.

Baldwin Park realtor Mae L. contacted Saber regarding a home she was selling. The floors were sagging. Saber's Project Design Specialist performed a thorough inspection of the home. The support posts, in the Crawlspace were sliding off of the concrete pads. See the attached picture. Saber recommended attaching New Crossbeams to the existing Floor Joists. We also recommended installing new all metal Smart Jacks, with concrete pads, to give the floors a consistent elevation.

Saber provided the inspection report and quote.

Bell Gardens resident Linda G. contacted Saber regarding a crack in the concrete slab under her home. Linda mentioned that the crack was running through the middle of her home, and she thought it was a tree root issue. Saber's Project Design Specialist performed a Free Homeowner Inspection. Shifting Soils forming Voids is the issue. Areas of the Foundation and driveway were sinking into these voids. Saber recommended that we install Foundation Piers to lift the sinking areas of the Foundation. We also recommended that the voids be filled with Polyurethane We provided the inspection report and the quote to Linda.

Bellflower resident Bonnie M. contacted Saber regarding sagging floors in their home. Saber's Project Design Specialist performed a Free Homeowner inspection. The Crawlspace had several Support Posts that were becoming detached from the floor joists they had been supporting. Saber recommended attaching new crossbeams to the existing floor joists. We also recommended installing Smart Jacks with new concrete pads. We gave this report and the quote to Bonnie.

Canyon Country resident Bill C. contacted Saber regarding cracking in the patio and walkways of his home. Saber's Project Design Specialist performed a Free Homeowner inspection. Voids had formed from shifting soils under the concrete. This was causing areas of the concrete to sink. We recommended our State-of-the-Art PolyLevel Injection Process. This would fill the voids with Polyurethane, without having to remove any concrete. We gave Bill the inspection report and our quote.

Cerritos resident Dolly S. contacted Saber regarding trip hazards that had formed in her driveway. Saber's Project Design Specialist Performed a Free Homeowner inspection. Shifting soils had formed voids under Dolly's driveway. Saber recommended our State-of-the-Art PolyLevel Injection Process. This would fill the voids with Polyurethane and eliminate the trip hazards. Dolly received a 30 day quote and a copy of the inspection report.

Duarte resident Merle N. contacted Saber regarding trip hazards where his driveway connected to the sidewalk. Our Project Design Specialist found that the end of the driveway was sinking into a void. Saber recommended our State-of-the-Art PolyLevel Injection Process, to fill the void and lift the concrete slab. Then we recommended sealing the gap between the slabs by using Nexus Pro. Merle received a copy of the homeowner inspection report and a 30 day written quote.

Harbor City resident MaryLou D. contacted Saber regarding trip hazards on the sidewalks and walkways of her property. Our Project Design Specialist performed a thorough inspection.

Our crew ground down the high edges of the cracks, thus eliminating the trip hazards.

MaryLou now has peace of mind.

La Crescenta resident Robert S. contacted Saber regarding sagging floors in his home. Saber's Project Design Specialist performed a Free and Thorough Homeowner inspection. The Support posts in the home's Crawlspace were leaning and starting to deteriorate. Saber recommended attaching new crossbeams to the existing floor joists. We also recommended installing new all metal Smart Jacks with concrete bases. Robert received the homeowner inspection report and Saber's 30 day quote.

Mission Hills resident Alan Y. contacted Saber regarding Seismic Retrofitting his home, that was built in 1974. He wanted  his home to meet the California Building Code.

Saber's crew installed Universal Foundation Plates in the home's Crawlspace. These plates strengthen the connection between the home, and it's foundation.

Alan was happy with the finished product. He now has peace of mind regarding his home not sliding off it's foundation in the event of a earthquake.

Montrose resident Pam M. contacted Saber regarding cracks in the walls and foundation of her home. She also told us that the windows and doors were sticking. Saber's Project Design Specialist performed a Free Homeowner Inspection. Pam's foundation was sinking into voids that were created by shifting soils. We recommended Push Piers to Lift the areas, that had Sunk. This would strengthen the foundation. We also recommended filling the voids with Polyurethane to stabilize the foundation. Pam received a copy of the two hour inspection report, and a quote to fix these issues.

Newhall resident Marc S. contacted Saber regarding his garage floor cracking and not being level. He also had issues with the concrete slabs on his driveway seperating and cracking. Our Project Design Specialist performed a Free Homeowner Inspection. Voids were found both in the garage and under the driveway. We recommended drilling doles through the concrete and into the voids. Then we would fill the voids with Polyurethane using our State-of-the-Art PolyLevel Injection Process. This would eliminate future cracking and slab seperation. We provided the inspection report and a quote that is good for up to 30 days.

North Hills resident Dexter M. contacted Saber regarding Trip Hazards on his back patio.The concrete slabs were shifting and sinking in areas. Our Project Design Specialist inspected Dexter's home. Voids were found under the patio. Saber recommended using our State-of-the-Art PolyLevel Injection Process to fill these voids with Polyurethane.This would lift the low areas of the patio and eliminate the trip hazards.Dexter received Sabers Home Inspection Report and our Quote.

Panorama City resident Limor M. contacted Saber regarding cracking floors in his garage that were becoming trip hazards. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids were found under the garage floor, and under the home's foundation. Saber recommended our State-of-the-Art PolyLevel Injection Process to stop the cracking in the garage floor. We also recommended attaching Push Piers to the home's foundation, to lift and strengthen it. Limor received Saber's Home Inspection Report and a 30 day quote.

Porter Ranch resident Avo S. contacted Saber regarding a wood pool deck, that had dry rot, that he was trying to replace. Avo wanted a more permanent solution than wood replacement. Saber's Project Design Specialist inspected this situation. We quoted removing and disposing the entire wood deck, and replacing it with concrete. Avo received the inspection report, and Saber's quote that is valid for 30 days.

Reseda resident George M. contacted Saber regarding cracked concrete walkways and cracked walls in his home. These cracks were spreading. Saber's Project Design Specialist performed a Free Homeowner inspection. The Foundation was sinking into voids, that were created by shifting soils. Saber suggested that Push Piers be attached to the base of the foundation. These would lift the foundation, back to a consistent elevation, when pressurized. This would strengthen the foundation. We then suggested filling the voids with Polyurethane to stabilize the foundation. George received a copy of Saber's Inspection Report, and a quote, which is valid for 30 days.

Rowland Heights resident Steve H contacted Saber regarding cracks in the walls of his home. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids were found under the interior floors of Steve's home. We recommended filling these voids with Polyurethane using Saber's State-of-the-Art PolyLevel Injection Process. This would both stabilize and give the foundation a consistant elevation. The cracks would stop spreading. Steve received a copy of Saber's Homeowner Inspection Report, and our quote, which is valid for 30 days.

Santa Fe Springs worker Adrianna contacted Saber regarding cracked concrete floors at the company she was representing. Saber's Project Design Specialist performed a thorough inspection of the building and found that voids had formed under the concrete slab. We suggested drilling holes through the slabs, and into the voids. We would then fill these voids with Polyurethane. This would stabilize the slab, and stop the cracks from spreading. Adrianna received a copy of Saber's Building Inspection Report, and our quote, which is valid for 30 days.

Sierra Madre resident Donna S. contacted Saber regarding cracks in the walkways and outside steps of her home. Our Project Design Specialist performed a thorough inspection of Donna's home. The shifting soils had created voids. The sinking areas of concrete were causing the cracks, and trip hazards. We recommended Saber's State-of-the-Art PolyLevel Injection Process. This would fill, and stop further expanding of the voids. This would also eliminate all of the trip hazards.

Donna received her Free Homeowners copy of Saber's comprehensive Inspection Report, and our Quote.

Signal Hill resident James S. contacted Saber regarding Trip Hazards on his patio. Our Project Design Specialist performed a comprehensive Free Homeowners Inspection. Saber recommended that the voids under the patio be filled with Polyurethane. This would stop the concrete from sinking and cracking. James received a copy of Saber's Home Inspection Report, and our quote.

South El Monte resident Jeff O. contacted Saber regarding cracks in the walls of his home. Saber's Home Inspection revealed that the foundation had weakened by sinking into voids. Saber recommended strengthening the foundation by installing Push Piers. When pressurized, these Piers would lift the foundation. We also recommended filling the voids with Polyurethane, by using Saber's State-of-the-Art PolyLevel Injection Process. Jeff received a copy of our Home Inspection Report, and a quote to fix these issues.

Stevenson Ranch resident Devin M. contacted Saber regarding cracks in the walls of their home. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids had formed, that were caused by shifting soils under Devin's Foundation. The Foundation was sinking. We suggested installing Push Piers to the Foundation. Once pressurized, these Push Piers will lift the Foundation back into a constant elevation. Then we suggested that the voids be filled with Polyurethane, by using Saber's State-of-the-Art PolyLevel Injection Process. Devin received a copy of our quote, and our thorough Home Inspection Report.

Sun Valley resident Fatima K. contacted Saber regarding cracks in her concrete patio and driveway. Our Project Design Specialist performed a Free Homeowner Inspection. Voids had formed under the concrete in both areas. Saber recommended using our State-of-the-Art PolyLevel Injection Process to fill these voids with Polyurethane. This would lift the areas of concrete that were sinking and cracking. Fatima received a copy of Saber's Homeowner Inspection Report. She also received a quote, which is valid for 30 days.

Tarzana resident Mike A. contacted Saber regarding cracking of the interior and exterior walls of his home. Our Project Design Specialist performed a thorough inspection of Mike's home. There were voids forming under the Foundation. The concrete was sinking into the voids. The concrete was cracking, which was causing cracks in the walls of Mike's home. Saber proposed installing Push Piers to Lift and Strengthen the areas of the Foundation that were sinking. We also recommended Installing Helical Tiebacks to Stabilize the Foundation. Mike received a copy of our Homeowner Inspection Report. He also received a quote.

Topanga resident Tiffany B. contacted Saber regarding sagging floors in her home. Saber's Project Design Specialist performed a inspection of Tiffany's home. The Support Posts in the Crawlspace were sliding on of their concrete bases. Saber recommented installing Smart Jacks and Steel I Beams to solve this issue. Tiffany received a Saber's written Home Inspection Report.

Winnetka resident Abdul Z. contacted Saber regarding cracks in Home Foundation and Driveway. Saber's Project Design Specialist performed a Free Homeowner Inspection. The home's Foundation was sinking into voids that had formed from shifting soils. The Driveway also had voids under it, that areas of concrete were sinking in to. Saber suggested attaching Push Piers to the Foundation to provide lift and strengthen it. We also recommended filling the voids under the driveway and Foundation with Polyurethane. This would lift and stabilize the concrete. Abdul received a written copy of Saber's Home Inspection Report.

Llano resident Chien L. contacted Saber regarding sagging floors in their home. Saber Performed a Free Homeowner Inspection. The Crawlspace had no Support Posts. We suggested attaching metal I beams to the existing floor joists. We could then give the floors Consistent Elevation, by attaching all metal Smart Jacks with Concrete bases. Chien received a written copy of Saber's Home Inspection Report.

Shafter resident Shane E. contacted Saber regarding cracks in the exterior walls of his home. He also told Saber that the windows and doors in his home were sticking. The attached picture shows one of the sticking doors. Saber's Project Design Specialist conducted a Free Homeowner Inspection. The Foundation of Sanes home was settling. The shifting soils has caused the Foundation to weaken, and subsequently sink. Saber recommended that push Piers be attached to the base of Shane's home Foundation. Saber would pressurize these piers, and lift the Foundation back to it's Consistent Elevation.

Valencia resident Stephen J. contacted Saber regarding his cracking sidewalk and driveway. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids were found under the sidewalks and driveway. Saber suggested filling the voids with Polyurethane by using our State-of-the-Art PolyLevel Injection Process. This will eliminate all of the trip hazards.

Pacoima resident Wendy R. contacted Saber regarding the sagging floors in her home. Our Project Design Specialist performed a thorough inspection of Wendy's home. The Floor Joists and Wood Support Beams were becoming unstable.

Saber's crew attached Steel I Beams to the existing Floor Joists. Then we supported these new I Beams with Pressurized All Metal Smart Jacks. The Smart Jacks are supported by rock and concrete.

Wendy is happy with the result. Her floors now have a consistent elevation.

Downey resident Helen F. contacted Saber regarding cracks in the concrete areas outside of her home. The cracks were spreading and were causing Trip Hazards. Saber's Project Design Specialist performed a Free and Thorough Homeowner Inspection of Helen's home. Voids had formed under the concrete walkways. Areas of the concrete were sinking in to these Voids. 

Our Crew drilled holes through the Concrete, into the Voids. We then injected Polyurethane into these Voids. Once the Voids were filled, our crew cleaned up any Polyurethane overflow, and made sure there were no more Trip Hazards. The attached picture shows our Crew using our PolyLevel Injection Process.

Los Angeles resident Yanira K. contacted Saber regarding upgrading the home Foundation for earthquakes. Saber does this for homes with Crawlspaces. First, Saber's Project Design Specialist performed a thorough inspection of Yanira's home.

Our crew installed Mesh Steel Wall Sheathing with adhesive and covered it with plywood to hold it in place. This strengthened the Foundation Walls. We also attached Universal Foundation Plates, and A35 Framing Angles to Strengthen the Connection between the Home and it's Foundation. 

Yanira now has Peace of Mind, that her home meets California's Building Code.

Apartment Manager Greg R. , in Los Angeles, contacted Saber regarding Cracked sidewalks that had formed trip hazards. See the attached picture. Our Project Design Specialist inspected the sidewalks and found that the trip hazards could be eliminated with concrete grinding. Our crew eliminated all of the trip hazards.

The Los Angeles office of Prudential Overall Supply contacted Saber regarding their concrete parking lot. There were Potholes and Large cracks that were Trip Hazards, and Damaging Vehicles. See the attached picture. Saber's Project Design Specialist inspected the Parking Lot.

Our crew excavated the damaged concrete slabs. We also removed all of the debris. we then poured and finished new concrete.

Torrance resident Jose G. contacted Saber regarding sagging floors in his home. Our Project Design Specialist completed a thorough Inspection of Jose's home. The connection between the home and Foundation was weakening. Support Posts were tilting, and becoming detached in the Home's Crawlspace.

Saber's crew installed Universal Foundation Plates, and A35 Framing Angles, to strengthen the connection between Jose's Home and it's Foundation. We then Straightened out the Tilting Support Posts, and strengthened the attachment to the Home and the Concrete base, by attaching Post Caps (pictured). Last of all we added All Metal Smart Jacks, to add more support to the floors.

Norwalk resident Nancy T. contacted Saber regarding a sagging area of the floor of her home. The French doors were difficult to open and close also. Saber's project Design Specialist performed a Free Homeowner Inspection. The Crawlspace support posts were failing in this area of Nancy's home.

Saber's crew excavated holes in the Crawlspace. We filled these holes with gravel. New All Metal Smart Jacks were installed on top of this gravel (attached picture). The Jacks were then pressurized, to give the floor, in this area, a consistent elevation. Nancy's home is now more stable, has no sagging floors, and has French Doors that function properly.

Los Angeles resident Shira T. contacted Saber regarding expanding cracking in the Concrete Walkways, and Foundation of her home. See the attached picture. Our Project Design Specialist inspected Shira's home. The issue was foundation settlement.

Our crew excavated holes, and attached Push Piers to the Foundation. The Piers were then Pressurized. This both lifted, the sinking areas of the Foundation, and Strengthened it. We also removed the old cracking Concrete Walkways and poured New Concrete. All Debris was removed, and our work area was cleaned up.

Hacienda Heights resident Patricia B. contacted Saber regarding Cracks in the walls of her home. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids had formed, caused by shifting soils, under the Foundation.

Saber's crew excavated holes and attached Push Piers to the base of the Foundation. The Piers were then pressurized. This Lifted and Strengthened the Foundation. See the attched picture.The Voids were then filled with Polyurethane, using Saber's PolyLevel Injection Process. This Stabilized the Foundation.

Whittier resident Eduardo B. contacted Saber regarding Cracks in the walls and foundation of this home. Saber's Project Design Specialist performed a thorough home inspection. There were voids under most of the Foundation. Eduardo's home had sinking Foundation issues. The Support Posts in the Crawlspace were literally falling apart. See the attached picture.

Sabers Crew installed Several Push Piers to the Foundation, and Pressurized them. This lifted and Strengthened the Foundation. All of the Voids were filled with Polyurethane, to Stabilize the Foundation. New All Metal Smart Jacks were added to the Crawlspace to Stabilize and Support the Floors.

Bell resident Jose P. contacted Saber regarding cracks that were starting to appear in the walls of his home. Saber's Project Design Specialist found Voids under the Foundation during the Home Inspection. Jose's home was sinking, see attached picture, and the Foundation was cracking.

Saber Suggested attaching Push Piers to the Foundation, and Pressurizing them. This will Lift and Strengthen the Foundation. These Piers also give the Foundation a Consistent Elevation. We also recommended Filling the Voids with Polyurethane, to Stabilize the Foundation. Jose received a Free Copy of Saber's Home Inspection Report.

Bethany Baptist Church, in Long Beach, contacted Saber regarding Trip hazards in the Walkways. Saber's Project Design Specialist found that Tree Roots were the cause of the Buckling Walkways.

Our crew excavated and removed all of the damaged concrete. The Tree Roots were removed. Rebar was installed, and Forms were built. New concrete was poured and finished. All trip hazards have been eliminated.

Whittier resident Robert M. contacted Saber regarding Sagging Floors in his home. Saber's Project Design Specialist performed a complete three hour Home Inspection. The Crawlspace Support Posts were Sliding on their Bases. See the Attached Picture.

Saber's Crew Installed Steel I Beams to the Floor Joists. We then Attached and Pressurized All Metal Smart Jacks to the I Beams. The Smart Jacks Are Supported by a Pit of Gravel. Robert's Floors are no longer Sagging.

Studio City resident Tony S. contacted Saber regarding Seismically Retrofitting His Home. Our Project Design Specialist performed a thorough two hour Home Inspection. The Crawlspace also had Support Posts that were sliding on their Concrete Bases.

Our crew, installed new All Metal Smart Jacks with two foot deep Gravel Bases. See the attached Picture. This Strengthened the Home's Foundation. We then attached Universal Foundation Plates and A35 Framing Angles to the Home and it's Foundation. These components Strengthened the attachment between the Tony's Home and it's Foundation.

Los Angeles resident Edward C. contacted Saber regarding Trip Hazards in the Walkways around his home. Saber inspected Edward's Home and the surrounding Property. Several Trip Hazards had been incorrectly fixed. See the attached picture. This is still a Trip Hazard, and isn't a permanent way to fix this Issue.

Our Crew removed the Asphalt Band Aid. We then Ground the High edges od the Concrete. This gave the walkways a Consistent Elevation, and Eliminated the Trip Hazards.

Los Angeles resident Ashley A. contacted Saber regarding the numerous cracks in the walls of her home. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids were Forming under the Foundation, and expanding. This was causing the Foundation to Sink and Crack.

Saber's crew, excavated holes, where the Foundation was sinking. Then we attached Push Piers to the base of the Foundation. Then the Piers were Pressurized, thus lifting the Foundation back to a consistent elevation. This also Strengthened the Foundation. Then we Filled the Voids with Polyurethane. This kept the Voids from further expanding. and Stabilized the Foundation.

Bell resident Jose P contacted Saber regarding boards falling off of his Foundation. See attached Picture. Sabers Free Homeowner Inspection Revealed, that Voids had formed under the Concrete Portion of the Foundation.

Saber excavated Holes, and attached Helical Piers to the Foundation. We then Filled the Voids with Polyurethane. These actions, Strengthened and Stabilized Jose's Foundation.

Torrance resident Dennis B. contacted Saber regarding upgrading the Earthquake Preparedness of his home.

Sabers crew installed Universal Foundation Plates, A35 Framing Angles, Post Caps, and Steel Wall Mesh.

Torrance resident Dennis B. contacted Saber regarding upgrading the Earthquake Preparedness of his home.

Sabers crew installed Universal Foundation Plates, A35 Framing Angles, Post Caps, and Steel Wall Mesh.

Torrance resident Dennis B. contacted Saber regarding upgrading the Earthquake Preparedness of his home.

Sabers crew installed Universal Foundation Plates, A35 Framing Angles, Post Caps, and Steel Wall Mesh.

Harbor City Apartment Manager Marylou D. contacted Saber regarding cracked Walkways, that were becoming Trip Hazards. See the attached Picture. Saber's Project Design Specialist performed a Complete Inspection of The Grounds. Saber recommended Concrete Grinding to completely Eliminate the Trip Hazards. Marylou received Saber's complete Inspection Report, and a Quote.

Los Angeles resident Rysha J. contacted Saber regarding cracks in the walls of her home. There were also cracks in the Driveway and Walkways, that have become Trip Hazards. Sabers's Project Design Specialist performed a Complete Property Inspection. Soilds had Shifted under the Foundation, Walkways, and Driveway.

Saber's crew excavated Holes and attached Helical Piers to the Home's Foundation. We then Pressurized the Piers to Lift, and Strengthen the Foundation. We then Filled the Voids with Polyurethane, to Stabilize the Foundation. Filling the Voids also eliminated the Trip Hazards on the Walkways, and DSriveways. In the Crawlspace, we installed Smart Jacks, to further Strengthen the Foundation, and eliminate the Home's Sagging Floors. See the attached picture.

Rysha was happy with the results.

Whittier resident Evangelyne M. contacted Saber regarding Cracked Walways and Pool Deck, that had become Trip Hazards. Saber's Project Design Specialist performed a Free Homeowner Inspection of the Home. Voids were Found under the Concrete.

Some of the areas, of the Pool Deck, were cracked too badly to save. Saber removed and Replaced this Concrete (see attached Picture). Holes were Drilled through Concrete, that could be saved, and the Voids were Filled with Polyurethane. This lifted and Stabilized the sinking Concrete.

Pomona resident Steven C. contacted Saber regarding Cracks in the Walls of his Home. The soils have Shifted under their Foundation. This has formed Voids, which the Foundation is sinking into.

Sabers crew attached Helical Piers to the Foundation. See attached picture. Once Pressurized, the Piers lifted the Sinking area of the Foundation. Then we Filled the Voids with Polyurethane. The Foundation is now Strengthened and Stabilized.

Long Beach resident Veronica C. contacted Saber regarding Sagging Floors in her Home. Saber's Project Design Specialist performed a thorough inspection of Veronica's Home. The Support Posts in the Crawlspace are in the process of sliding off of their concrete bases.

Saber's crew attached steel I Beams to the Floor Joists. We then attached Smart Jacks to the I Beams. We pressurized the Smart Jacks. The Floors are no longer sagging.

Pomona resident Jolin W. contacted Saber regarding Sagging Floors in Her Home. Saber's Project Design Specialist performed a Thorough Home Inspection. The Support Posts were failing in the Home's Crawlspace. Years of Eartquakes have caused the Home to Slide on it's Foundation also.

Saber recommended installing Seismic Retrofit Components to Strengthen the connection between the Home and its Foundation. We also suggested that Steel I Beams be attached to the existing Floor Joists. Then we wouls attach Smart Jacks to the I Beams and Pressurize them. This would give the Floors a Consistent Elevation.

San Gabriel resident Vincent W. contacted Saber regarding Cracks in walls, and Sagging Floors in his home. Sabers Project Design Specialist performed a Complete Home Inspection. Years of Eartquakes had caused Vincent's Home to start sliding on it's Foundation.

Saber suggested attaching Seismic Retrofittings to the Home and it's Foundation, to strengthen their connection. We also recommended that Smart Jacks should be installed to the Floor Joists in the Crawlspace to Stabilize the Floors.

Hacienda Heights resident Walter W. contacted Saber regarding Cracks that were in the walls of his home. Saber's Project Design Specialist performed a thorough and Free Homeowner Inspection. Voids were located under the Foundation.

Saber suggested attaching Push Piers to the Foundation, to Lift the Areas, that were sinking into the Voids. Then we would fill the Voids with Polyurethane, to stabilize Walter's Home.

Diamond Bar resident Harry W. contacted Saber regarding a Exterior Cracked Wall, that was running down the length of his Home. Saber's Project Design Specialist performed a Thorough Home Inspection. Voids were Located under the Foundation, where the wall was Cracking.

Our Crew excavated holes next to the wall. We attached Push Piers and Pressurized them. See the attached picture. This lifted the area that was sinking. This also gave the Foundation Consistent Elevation. We then filled the Voids with Polyurethane. This Stabilized the Foundation.

Los Angeles resident Rochelle P. contacted Saber regarding Upgrading the Earthquake Preparedness of her Home.

Saber Attached Universal Foundation Plates and A35 Framing Angles to Strengthen the Connection between the Home and the Foundation. We then attached Post Caps to Support Posts to Strengthen the Connection to the Floor Joists and ther Concrete Bases.

East Los Angeles Homeowner Albi L. contacted Saber regarding Cracking Walls and Doors and Windows that aren't functioning Properly. Voids have Formed under the Foundation. The Foundation is sinking. The Home is Sliding on it's Foundation.

Saber's crew attached Push Piers to the Foundation to Lift and Strengthen it. We also filled the Voids with Polyurethane. This Stabilized the Foundation. Last of all, we attached Seismic Retrofitting Componets to Strengthen the Connection between the Home and it's Foundation. See the attached picture of a Universal Foundation Plate.

Redondo Beach resident Hank O. contacted Saber regarding cleaning up and waterproofing the Crawlspace under his Home. His floors in his home were cold. Saber's Project Design Specialist performed a Thorough Home inspection. The Crawlspace was damp and cold.

Saber's Crew installed Clean Space Sheeting. See the attached picture. We also installed a dehumidifier, and a Sump Pump. These upgrades have helped will keep the Moisture out, and provide extra storage space for Hank.

Rancho Palos Verdes resident Joseph S. contacted Saber regarding cracking walls in his home. Saber's Project Design Specialist performed a thorough Home Inspection. Voids had Formed under the Foundation. The Foundation was sinking into these Voids, causing the walls to crack.

Saber's Crew excavated Holes where Joseph's Home was sinking. We cut away the excess concrete Foundation. Then Push Piers were installed and Pressurized, thus lifting the sinking areas of the Foundation. See the attached picture. Saber then filled the Voids with Polyurethane.

Long Beach resident Tony M. contacted Saber regarding sagging floors in his home. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection. The Support Posts in the Crawlspace were failing. The age of the Home and years of Earthquakes were the culprits.

Saber's Crew dug Pits in the Crawlspace under the Existing Floor Joists. We then filled these pits to form the Base of the Smart Jacks that we installed and Pressurized. This gave the floor a Consistent Elevation.

Hawthorne resident Andy F. contacted Saber regarding Cracks that were spreading in the walls of his home. Saber's Project Design Specialist performed a thorough Home Inspection. Voids were located under the Foundation. The Foundation was sinking and cracking.

Saber's crew attached Push Piers to the base of the Foundation. See the attached Picture. We Pressurized the Piers, which lifted the sinking areas. This strengthened the Foundation, and gave it a Consistent Elevation. Then we filled the Voids with Polyurethane to Stabilize the Foundation.

Los Angeles resident Don G. contacted Saber regarding Trip Hazards that had Formed on his back Deck. Saber's Project Design Specialist performed a thorough Inspection of Don's Home. Voids had formed under the Deck. The Concrete was sinking into these Voids.

Saber's Crew drilled holes through the Concrete, and into these Voids. We then installed Injection Nozzles into the Concrete Strips. See attached Picture. Saber then Used our State-of-the-Art PolyLevel Injection Process to inject Polyurethane in to the Voids. This lifted the sinking areas, and Eliminated the Trip Hazards.

Tom P. contacted Saber on behalf of a West Covina retirement facility. This facility had concrete issues that were causing walkway trip hazards for its guests. 

Cascia L. contacted Saber after having concerns about her raised foundation. Following a thorough evaluation, Design Specialist John G. recommended that Cascia implement our Seismic Strengthening system. 

Monrovia resident Carlos G. contacted Saber about strengthening his raised foundation against seismic activity.  A Saber design specialist performed a free evaluation of Carlos' property and determined that seismic strengthening was the best solution.

Foreman Jordan S. and crew arrived on time and ready to work. They installed the Universal Foundation Plates throughout the work area, strengthening the sill plate and foundation bond. 

Carlos was very happy with the seismic strengthening work performed, giving Jordan and crew a great review.

Long Beach resident Garret S. contacted Saber about his failing front porch foundation. A saber Design Specialist recommended push piers with a steel beam to support his porch.

Foreman Joe S. and crew arrived at the job on time and ready to work. They properly installed the push piers and beam, providing support to Garret's front porch. Garret was very happy with the work performed, giving Joe and crew a great review. 

Rancho Palos Verdes Resident Byron and Elaine W. contacted Saber to secure their home in the case of an earthquake. Design specialist Steven O. recommended a Saber seismic strengthening system to help secure the homes raised foundation.

Foreman Jordan S. and crew arrived at the job on time and ready to work. The install went well, prompting Byron and Elaine to leave a great review.

Altadena resident Steve L. contacted Saber about his home's failing foundation. A Saber design specialist performed a free home evaluation and discovered the one side of the home had sunk. Push Piers was suggested to stabilize and secure the home's foundation.

Saber Foreman Jose P. and crew arrived at Steve's residence on time and ready to work. They installed 12 Push Piers in total, securing the home's foundation. Steve was very happy with the work done, giving Jose and crew a great review. 

Bonnie S., a representative of a Long Beach apartment complex, contacted Saber about tree roots that were lifting their concrete and creating trip hazards. Saber Concrete Division Specialist Gilbert S. walked the property with Bonnie and determined that root removal and concrete replacement was the best solution for the job. 

Saber's concrete crew removed the damaged concrete, removed the roots and then replaced the concrete. 

Homebuyer Frank H. wanted to have his new home evaluated due to the front door jamming and uneven floors. Saber sent out Project Design Specialist and real estate expert Ken F.  Ken helps both buyer and seller by providing a thorough evaluation and the best solutions for settling foundations. Ken provided WOW! service, and Frank stated, "Ken was very professional and knowledgeable; he knew his stuff and explained it very well. I give him 5 stars." Saber is happy to help homeowners get the answers they need to make good decisions.  

Homeowner Paul L. of Los Angeles was interested in getting a quote for seismic retrofitting in the event of future earthquakes. Project Design Specialist Jason S. thoroughly evaluated the home's crawl space and provided Paul with a report and an estimate of the cost of the job. Paul gave Jason top grades on his customer survey, stating "Jason went above, beyond, over and underneath the call of duty...I'm sure." Sometimes a Saber Specialist has to don coveralls and crawl under a house in order to give a proper assessment. That's what WOW! service is all about.

Mary C. of Sylmar noticed that she had slab cracks, wall cracks, and a misaligned door. She sought answers, and Project Design Specialist Jon P. arrived to help. Jon performed a thorough analysis of her property and recommended the installation of push piers and PolyLevel to stabilize the slab floor as well as the foundation. Mary was very satisfied and writes, "Jon was very knowledgeable, sincere and honest. A very good experience." Mary has elected to go forward with her project, and Saber will continue providing WOW! service along the way. 

Los Angeles homeowner Miguel G. noticed cracks on both interior and exterior walls. Cracking is a common result of a settling foundation. Project Design Specialist Jason S. came to the home to evaluate and assess the situation. Jason recommended a solution of helical piers to provide complete foundation stabilization and lift. A complete report and free estimate were provided to Miguel. He was very pleased and wrote, "Jason S. was very helpful and professional. He explained everything in detail. Thanks again!!" Our Specialists are always happy to answer any questions that a homeowner may have. That's part of our commitment to providing WOW! service.  

Homeowner Chuck B. of El Segundo contacted Saber with his concern about his garage. He noticed an area that had sunk about three inches. Project Design Specialist Jason S. came out to evaluate the situation. Jason proposed a solution of helical piers  to raise the slab along with PolyLevel to provide a permanent solution. Chuck was very happy with Jason. He gave him the highest marks on our survey and wrote, "Excellent presentation and explanation of the problem." Jason was happy to provide Chuck with WOW! service.

Homeowner Bill M. of Los Angeles is in the process of selling his home, and he knew that he had problems in the garage foundation. He could see that the slab was not level, possibly caused by a tree growing next to the garage. Project Design Specialist Jason S. came out and did a free inspection and evaluation of the problem. Jason recommended the installation of six push piers to provide permanent stabilization for the garage. Bill is going ahead with the project. He gave Jason a 10 out of 10 score, and writes, "Jason is the best!!! Finally a sales professional who knows what he's doing." At Saber, we pride ourselves on offering our employees the best training in the business. We strive to earn the trust that our customers place in us. 

San Marino homeowner Mel C. had several areas of concern on his property. The pool deck was cracking as well as the driveway settling next to the wheelchair ramp. Project Design Specialist Steven O. recommended the application of PolyLevel as well as NexusPro joint sealant. This would level and seal the areas of concern and eliminate dangerous trip hazards. Saber crew Scott L. and Jamin C. came out to the home to do the project. Mel had great things to say about the crew. He writes, "It was a pleasure having Scott and Jamin repair our property. They were prompt, pleasant, informative, friendly, efficient, and cleaned up after themselves. You may use me for a reference." At Saber, we love referrals! We hope that Mel will spread the word with his neighbors that Saber can resolve their settlement problems. 

Homeowner Linda G. noticed sinking in her foundation, as well as cracks both inside and outside. Project Design Specialist Jon P. went out to evaluate the problem. Linda asked Jon to evaluate the whole house rather than just concentrating on the sinking area. She plans to remodel in the future, and before she makes any changes she wants to make sure the house has a solid foundation. Linda writes of Jon, "Jon was very professional and very knowledgeable. He was able to answer all the questions that I had to ask. He knew that this was only an estimate that was to be done and he never tried to force me into giving his company the job. I thank him for that. He was very good." At Saber, providing WOW! service means doing an honest evaluation without pressuring the homeowner for a sale.

West Covina homeowner Laura S. saw that the floor between the living room and dining room was sloping. Noticeable cracks were present in the living room as well as on the exterior of her home. She contacted Saber for an evaluation, and Project Design Specialist Jason S. assessed the property. Jason recommended the installation of push piers around the perimeter of the home, as well as two supplemental metal beams to provide support. This will remedy the sloping as well as prevent any further shifting in the future. Laura was very satisfied with Jason and writes, "Jason was thorough and spent time with us explaining the repair solution to our foundation." At Saber, we love providing lasting solutions to homeowners. There is nothing better than to know that your home is on a firm foundation. 

Sherman Oaks homeowner Christine B. knew that her crawlspace had an issue with moisture. She wanted a quote for a dehumidifier as well as an evaluation of the crawl space. Project Design Specialist Jason S. inspected the crawlspace and took pictures, measurements, and moisture readings. Jason recommended our CleanSpace Crawl Space Encapsulation System. With the installation of CleanSpace, the issues of mold, moisture, insects, and drainage will be remedied. Energy bills will also be lowered. Christine writes, "Jason did a wonderful job! He took the time and went throughout the entire space. We appreciate the time Jason spent and feel that your company is one of the best in the city! Thank you."  At Saber, we seek to give our customers quality WOW! service. We are happy to have succeeded once again. 

--

Homeowner Miralba E. was concerned about sinking concrete at her Pomona home. Her areas of concern included the pool deck in the backyard and the front driveway. Project Design Specialist Brian N. proposed a solution of Polylevel to even out the settling concrete. Brian also suggested NexusPro crack repair and our Concrete Protection System. Miralba was very satisfied with Brian's evaluation, and on her survey she commented, "Very honest people." At Saber, our specialists design solutions geared to the homeowners specific problem. We want to provide peace of mind for years to come. That is part of our commitment to WOW! service.

Ponce and his wife reached out to have help with their 1960s home in Long Beach CA that they recently moved into. They had issues with a smelly and moist Crawlspace underneath their home. They were very concerned about their new investment; they didn’t have the peace of mind they would like to have. One of our talented Foreman Bryan A. installed over 1440 square feet of Cleanspace, removed a ton of debris, properly installed 12 vent sealing, a high-quality condensate pump, a customed fitted Everlast door, a compact high-performance Aprilaire 1820 dehumidifier, and a freshly installed electrical outlet. Ponce and his family were overjoyed and happy with integrity as well as our quality of work. Now the family can enjoy having the peace of mind of knowing that their crawlspace is clean and safe.

Robert Licon, a homeowner in Long Beach California has lived in his 70-year-old home for the past 5 years. They recently had a home inspection and learned there is a crack in their foundation which can be a big problem during an earthquake. Robert and his wife understood the seriousness of the problem and called us right away to do Seismic Retrofitting to properly reduce their risks. They didn’t want to deal with any further issues that can be caused by the crack and really wanted peace of mind when they are thinking of their home. They were aware of our reputation and knew we will give them redefining service and leave them saying WOW. Our Foreman Bryan installed 4 new posts with pads and caps, a 15-foot supplemental beam, a single foundation wall strap to address their crack. These fixes now make the home much safer and have reduced the risk of damage if an earthquake were to happen. Now Robert and his wife can have that peace of mind that they wanted from having a safer home.

Homeowner Ray C. contacted us to fix an issue they’ve had since they moved into their home last year. Their early 1970s home in Hacienda Heights developed a horrible musty smell which would get notably worse after it rains. Ray said, “The issue has been here the whole time, but gets really bad after the rain. I want to fix this problem as soon as possible; the smell is too much for me and my family.” Project Design Specialist Eamon R did the evaluation for the home and found that the moisture levels in the crawl space were through the roof. The humidity was peaking near 90% in the entire space. With humidity being so high, the wood readings were above 55% moisture. Have a high reading of humidity and moisture will not only cause the bad odor the family is experiencing, but it can also cause insect infestation, mold growth, and sagging floors. After Eamon’s inspection, he recommended that the home received the CleanSpace package. Ray was shocked by Eamon’s results and decided to continue with the project. Bryan and his crew installed a state-of-the-art Smartsump, 164 feet of Smartpipe, 1275 square feet of Cleanspace, vent sealing, a condensate pump, a custom-fitted Everlast door, an energy effective Aprilaire 1820, and some electrical. After Bryan completed the installation Ray couldn’t be any happier. He said, “Bryan and his crew were so professional. They arrived on time, finished the job quickly, and left our home without leaving a trace!” We at Saber believe in deliver WOW service to homeowners and help them to achieve a safe and stable home.  

Homeowner David A. out in Long beach noticed that his driveway was becoming uneven and the cracks were starting to be a real eyesore. He and his wife first noticed the problem a couple of years ago but the concrete was barely uneven and the cracks were very minor. However, now some slabs are settling and the cracks are a terrible eyesore. At this point, the couple knew they needed help. One of our Project Design Specialist Peter G. identified that David would need PolyLevel inserted into two areas of the driveways as well as nearly 400ft of our NexusPro Joint sealant and crack repair. One of our PolyLevel experts Scott L. arrived with his crew, they began with the installation of Poly. The Poly lifted the concrete that has settled and became level to the rest of the concrete. After the Poly was finished Scott would seal all the joints as well as the cracks of the driveway with NexusPro. NexusPro is a sealant that is weather-resistant and never fully hardens. This allows the concrete to be protected and have the best finish possible. David and his wife were extremely pleased, they didn’t expect to get the results that Saber was able to provide. We were happy to provide the couple with a one-of-a-kind experience and showed them that we gave them the best permanent solution.

Homeowner Robert L moved into their 1950s home in SD roughly 5 years ago. Recently they had an inspection of their property and the inspector discovered that there was a foundation crack and recommended that they had a foundation repair company come and give an estimate. Robert found us and said, “It is important to us that the company we select has a good reputation. – It’s important to my wife that this crack is fixed correctly so that we have peace of mind.” Bryan and his crew installed four new posts with pads and caps, a fifteen-foot supplemental beam, and a foundation wall strap. Robert and his wife were happy with the results and more importantly, they don’t have to worry about having future problems with their home and now can have the peace of mind they always wanted.

Homeowner Helga G, wanted to get her older late 1930’s home seismic retrofitted to prevent any damages from the next earthquake. She told us that this home is her forever home and she wants to make sure it’s ready for the next Earthquake or any future events. She has lived in this house for 23 years and she is now seeing the age of her home want wants to take care of it. John G., one of our project design specialists found that there were areas throughout Helga’s crawl space that have support posts that were not properly reinforced. To complete this project is Bryan and his crew. They replaced two wood posts with caps and installed 16 new post caps. Helga was overjoyed with the results, she went to google and said, “Excellent earthquake retrofit work done by Saber's Production Foreman, Bryan Acevedo, and his assistant. Saber should be very proud of having such dedicated, hard-working employees who help make Saber such a trusted and professional company.”  Now she can have peace of mind knowing her home is secured properly and is well prepared for any future seismic activity.

Homeowner Michael G. in Los Angeles, CA had a major issue with his crawl space. He moved into his freshly remodeled home five months ago and right away starting noticing a problem. There was a smell that was getting worse and worse. To find the source of the problem Project Design Specialist Jason S. went into the crawl space and found that there were very high levels of humidity which was causing mold and allowing too much moisture into the wood. To make this project further, Bryan and his team first removed all debris from the crawl space and installed the Cleanspace service which includes: Drainage matting, vapor barrio, an energy-efficient Aprilaire dehumidifier, a condensate pump, and a SaniDRY dehumidifier. After Bryan and his team finished the installation, Michael was thrilled with the professionalism and quality of work we have done on his home. Now he doesn’t have to be bothered with a musty and gross crawl space. 

Homeowner Carol E. had a massive mold problem in her 1960s home in Long Beach. Her home has had mold remediation done twice in the past six years and now she needs to do it again. Mold remediation is the disposal of moldy porous building materials and involves the cleaning and disinfecting carpet and anything else that can be saved from excessive mold growth within the home. Carol didn’t experience the problem herself; she lives out of state and rents her property. She wanted to make sure that her home didn’t impact the health of her tenants and provide them with ideal living. Her real estate agents wanted her to replace the floor joists as well as other parts of her crawl space to address the issue. Our Project Design Specialist Jason was called in to do the evaluation and found that the crawlspace had over 68% humidity within the crawl space. Jason notified Carol that the real estate agent's suggestion was only a Band-Aid fix and eventually the humidity will cause mold again. Carol agreed with Jason and decided to go along with the project. Bryan A. and his crew took on this project and installed the Cleanspace Service. This service included: 930 square feet of Cleanspace, debris removal, a Cleanspace vent sealing, a custom-fitted Everlast door, an energy-efficient Aprilaire 1820 dehumidifier, a Smart Sump, and some electrical work. Now Carol can have the peace of mind of finally solving her mold issue the right way. 

Homeowner Wence P. started noticing a problem in his new home in Long Beach that he recently moved into. He started to notice a musky smell coming from his crawl space. After a few months of dealing with the odor, he decided to call Saber to evaluate his problem. Our project design specialist Jason S. found EXTREMELY high levels of humidity. His meter read that the humidity ranged from 77.1 to 81.1 percent of humidity. Having this high of humidity levels is definitely the reason why the homeowner is experiencing problems. Having high humidity will cause mold in the crawl space which is the reason why there is a bad odor. Also, the humidity will cause moisture to affect the floor joists of the home. The wood readings were also very high reaching nearly 19 percent! This will cause even more problems that are far more costly. Wence understood the issues his crawl space was having and agreed to move forward. Bryan A. and his crew took on this project and cleared out all the debris of the home and installed the Cleanspace package. This service took two weeks to complete and included: 1446 square feet of clean space, 12 vent sealings, a condensate pump, a customer-fitted Everlast door, every efficient Aprilaire 1820 dehumidifier, and a new electrical outlet. From this install, Wence now has the peace of mind he was looking for and no longer has to deal with a moldy crawlspace that would eventually have cost him even more money down the road. 

Homeowner Andrew and Nicole C. in Long Beach contacted us for our PolyLevel service. They have been having issues with their pool deck since they've moved into their home in 2018. They now decided it was time to repair their uneven concrete and improve their pool deck. Project design special evaluated the pool deck and found it will need several areas of lift with Poly and will need to remove all the old sealant to be replaced with our NexusPro sealant. Our PolyLevel specialist Scott L took on this project and installed 91 feet of nexus joint sealant after the old sealant was removed, 59 feet of Nexus crack repair, and lifted 8 areas of the pool deck with Poly. After Scott finished the project the couple was overjoyed by the results and are excited to no longer worry about their concrete around their pool. 

Homeowner Kathy M. in Pasadena decided to get her settlement repaired by installing SmartJacks. Her home had some major issues with stability and her floor was sagging. Project Design Specialist Jason Sparks evaluated the crawl space and concluded that the home needed some major settlement repair. After sitting down and discussing the solution Kathy decided to move forward with the project. Bryan A. and his crew moved forward with the project and installed 10 SmartJacks, a 56-foot supplemental beam, and two push piers. After seeing the work Bryan and his crew did she had peace of mind and knew that our solution was a long-term viable solution. 

Homeowner Nick k. in Los Angeles decided to go to use our CleanSpace service so he didn't have to endure his smelly crawlspace any longer. About six months ago Nick bought his 1960s but noticed his purchase came with a smell. He knew that the smell was coming from the crawlspace and understood that it can cause mold. Our Project Design Specialist Jason S. evaluated the property and found that the crawl space did have high levels of humidity reaching the range of 68 to 71 percent with the would moisture being 18 percent. Nick and his wife understood the issues of their crawl space and chose to move along with CleanSpace. Bryan A and his crew were tasked with this project but before they began that had to do full debris removal. After the crawl space was cleaned Bryan installed 1074 feet of Cleanspace, 6 CleanSpace vent sealings, 3 condensate pumps, 2 custom-fitted everlast doors, and 3 Aprilaire 1820 dehumidifiers. Nick and his wife were so pleased with the final results from Bryan and his crew. They now have peace of mind and no longer have to worry about their crawl space.

Homeowners Yolly and Isagani P. in Walnut, CA needed our PolyLevel service for their patio. When they bought their home ten months ago, they knew they would need to fix their issues with their concrete. Since they moved in, they already noticed their back patio getting rapidly worse. They want to fix their concrete to not only to prevent costly repair but to feel safe using their patio. Yolly and Isagani bought this home knowing it was going to be their forever home, the last thing they need is an accident to happen. Our Project Design Specialist John G. found that in order to level the concrete we’ll have to use our PolyLevel solution and fill in any cracks and joints with NexusPro sealant. Raymond R. and his crew completed the installation by installing PolyLevel and 918 square feet NexusPro. The couple was overjoyed by the team’s results. They couldn’t wait to get their grandchildren to play in their patio with the peace of mind of not having any of the old hazards.  

Homeowner Tony G. in Claremont, CA needed to get his driveway repaired with our PolyLevel and NexusPro solutions. Tony has been living in his home for over 40 years and decided it was time to sell his property. However, he wanted to maximize his value when selling but with his driveway in the condition it was in, he knew repairs had to be made. Tony has had concrete problems since he first purchased the property but in the past 10 years his problems amplified. One of our Project Design Specialist evaluated the property and found there every slab of concrete needed PolyLevel injection and the cracks and joints needed to be filled with NexusPro. Tony agreed with our suggestion and decided to move forward with the project. Our PolyLevel specialist Scott L. has had many years and is more than qualified for the job. He installed 80 pounds of PolyLevel and 120 feet of NexusPro for this project. Tony G and his wife were so happy with the final result. They were able to preserve the value of their home and sell their home confidently. 

Homeowner Jim B. reached out to use to get his Driveway repaired by using our PolyLevel solution in Oceanside. He’s been living in his mid-90s home for ten years. When he first moved into his home, he noticed that he had cracks and settling concrete. Fast forward to today, the concrete is much worse due to the settlement.  Jim decided it was finally time to take care of the tripping hazard for his and his family’s safety. Our PolyLevel specialist Scott L. injected 676sq ft of Polyurethane and 31 ft of our high-end sealant NexusPro for the joints and cracks.  He and his family now have the peace of mind that no one can get hurt by their driveway. 

Homeowner Stephanie Y. had some major moisture problems with her crawlspace in Torrance, CA to solve her problems she opted to receive the CleanSpace solution. Not only was she starting to smell the mold, but she was also starting to notice the floor starting to sag. Our Project Design Specialist Jason S. found that the humidity levels were above 71% which is extremely high. Stephanie opted for the full clean space service which solves all over her issues. Bryan A. and his crew took on this project and installed a SmartPump, sump pump, 360 feet of CleanSpace, condensation pump, a custom-fitted Everlast door, an energy-efficient Aprilaire dehumidifier. Stephanie was excited and extremely happy with the final results of the installation. She and her family now have peace in mind when it comes to their home. 

A homeowner in San Gabriel, California, noticed a drop in the concrete slab inside his garage and was referred to Saber Foundation Repair to conduct a free, no-obligation inspection.

Jarvis G. called Saber after estimating the concrete slab had sunk nearly 3 inches around the perimeter of the detached garage. There was also a large crack down the middle of the garage slab.

Jarvis, who has lived in the home for nearly 40 years, first noticed an issue with the concrete slab years ago but said it had gotten worse after an earthquake. He needed the uneven floor fixed because he uses the garage for woodworking and it was impacting his ability to build things precisely. He was also concerned about water getting into the garage through the separation of the floor and the baseboards.

A Saber concrete repair team was able to lift and level the concrete garage floor back into its original position and seal the joints. The team used PolyLevel, a proprietary polyurethane foam used exclusively by Saber Foundation Repair in southern California, to lift the concrete 3 inches. The foam quickly expands and cures, allowing Jarvis to use the garage floor immediately after the installation.

Jennie, a homeowner in Diamond Bar, Calif., became concerned about the structural integrity of her house after finding cracks on the walls and floor. She called Saber Foundation Repair to inspect the foundation and concrete of the property.

Jennie built the house in 1985 and had lived there ever since, so it was important to her that the home remained safe and structurally sound for years to come. Not only was she concerned the cracks in her home's floor and walls were getting worse with time, she also feared an earthquake could cause a huge safety hazard.

A Saber design specialist recommended fixing the foundation and protecting it from further damage by using helical piers. Helical piers are designed to transfer the weight of your home to load-bearing soil or bedrock, permanently stabilizing the home's foundation. He also found voids under concrete slabs, which caused the cracks in the flooring. He recommended using PolyLevel, a polyurethane foam injected under the concrete that quickly expands to fill any gaps in the soil.

Jennie agreed these solutions would be the best option to permanently fix her concrete and foundation issues, giving her peace of mind.

A hospital in Long Beach needed to either repair or replace their walkway due to it sinking.

A contractor for the hospital called Saber Foundation Repair to come out and inspect the concrete slabs. Hospital officials said they would prefer a quick and permanent solution to level and repair the walkway, as opposed to the time-intensive process of completely replacing it. They also knew that even if they replaced the walkway with new concrete, the issue might appear again as it wouldn't address the root of the problem.

Soil conditions are the most common problem for concrete issues. Saber's concrete leveling solution contains a polyurethane foam that would support the concrete slabs from underneath. This would offer support regardless of what was happening with the soil below.

Saber's concrete repair installation team worked quickly and diligently to level all of the slabs in the walkway and bring them back to their original position.

Emily K. reached out to Saber seeking peace of mind amidst frequent seismic activity in her Long Beach home. After living in the home for 12 years and noticing cracks emerging six years into her occupancy, her concern heightened.

During the inspection, Saber's meticulous design specialist, John, thoroughly explained the issue and proposed a permanent foundation stabilization plan. Highlighting seismic reinforcement as a crucial component, John aimed to provide a reliable solution addressing Emily K.'s concerns about her home's stability.

Impressed by the detailed analysis and proposed solution, Emily K. opted to entrust Saber with rectifying her foundation issue, prioritizing the enduring security of her home. The crew used a 3" push pier and installed a 6 Linear Feet Steel Beam Under Footing - Galvanized to permanently stabilize the foundation.

Now Emily K. can enjoy peace of mind knowing her home is secured properly and is well prepared for any future seismic activity.

Thomas, residing in Los Angeles, California, found himself increasingly concerned about the stability of his hillside home. Noticing unsettling spaces between the foundation and walls, he felt a sense of urgency to address these issues. Seeking assurance, he reached out to Saber, a trusted foundation repair contractor, to inspect and provide solutions.

Jason, our diligent Project Design Specialist, visited Thomas's three-story home for a thorough assessment. His inspection revealed unsettling signs of the home settling due to the challenging hillside terrain and soil composition. Jason recommended a comprehensive approach, suggesting seismic strengthening, wall crack repairs, and lifting the settled foundation.

Understanding the homeowner's anxieties, Jason took the time to explain the intricacies of the situation. He carefully detailed the proposed solutions, offering clarity and reassurance. Thomas was relieved to receive such caring service and a comprehensive explanation from Saber Foundation. Confident in the expertise and solution provided,

Ron M., a homeowner in Santa Clarita, reached out to a local foundation repair contractor due to his sinking patio creating water accumulation and erosion. The unlevel concrete had become a hazard, leading to tripping incidents for Ron and his family. Seeking peace of mind and an end to these trip hazards, Ron wanted a solution.

Our project design specialist, Robert, presented all the options to restore the safety of Ron's home and fix the concrete patio issues. Beyond addressing the immediate concern, Robert also proposed protecting other concrete slabs from potential future drops or unevenness. This impressed Ron, leading him to choose Saber for their concrete repair project.

Saber's concrete repair team, led by foreman Alvino, restored and leveled the concrete slabs. This not only enhanced safety but also revitalized the patio's appeal for Ron's home. The concrete patio repair and foundation fix provided by Saber brought back Ron's peace of mind, ensuring a safer and more visually pleasing outdoor space.

Leland lived in her Van Nuys house for 10 years. Built in 1954, the house started showing signs of structural issues a few years back. Concerned for her safety and security, Leland decided it was time to hire an expert. She found Saber Foundation Repair through the Earthquake Brace + Bolt (EBB) program and hired us for the job.

Our Foreman, Alex O., and the team implemented our Seismic Design Build Package to secure Leland's home. The retrofitting process involved installing engineered metal connectors and reinforcement materials at key stress points throughout the structure. This included:

• Hold downs, anchors, and anchor bolts: To secure the structure to the foundation.
• Strap ties and framing angles: To reinforce connections between different parts of the structure.
• Wood blocking and structural sheathing: To further strengthen the walls and prevent collapse.

The goal was to counteract three main earthquake-induced forces: racking, sliding, and overturning. In engineering terms, we transformed Leland’s house from a building with loosely connected parts into a unified structure with a "continuous load path" from the foundation to the roof. Our experienced crew utilized a comprehensive set of seismic connectors to ensure the house structure stayed intact despite seismic forces that could easily tear an unreinforced house apart. Leland was highly satisfied with the results.

Merlin discovered Saber Foundation Repair at a home improvement show in Orange County. Having experienced several earthquakes in Southern California that year, he was keen on evaluating and protecting his home against future seismic events. Merlin met with our Design specialist who fully evaluated Merlin's home  foundation and proposed our Seismic Design Build Package.

Our Foreman, Sammy M., led the crew to secure Merlin's home using the latest retrofitting techniques. The process involved installing engineered metal connectors and reinforcement materials, such as hold downs, anchors, strap ties, and framing angles, at critical stress points. This comprehensive approach transformed Merlin's home into a unified, resilient structure capable of withstanding significant seismic forces.

Merlin was delighted with the results and expressed his peace of mind knowing his home was now better protected against earthquakes.

When Larissa reached out to Saber Foundation Repair about her home in Los Angeles, she was understandably concerned. "My house is over 100 years old and I wanted to have the foundation evaluated," she explained. Larissa had noticed increasingly bouncy floors, a problem that only seemed to be getting worse over time.

Recognizing the urgency, we sent our design specialist Jason Sparks to conduct a thorough evaluation of her home’s crawl space and foundation. Upon inspection, Jason identified that the wood posts supporting the crawl space had significantly weakened over the years, contributing to the sagging floors. He recommended the installation of SmartJacks® for better support and stability.

Our foreman Sammy Molina and his dedicated crew got to work, securing the crawl space with these state-of-the-art crawl space supports. The SmartJack® Crawl Space Stabilizer, an adjustable supplemental support system, is specifically designed for sagging crawl spaces. This innovative product not only provides the necessary support for failing structures but can often lift sagging floor joists or beams, restoring them to their original position.

One of the key advantages of the SmartJack® system is its construction from strong, corrosion-resistant, galvanized steel. Unlike other systems that may rust over time, the SmartJack® remains adjustable for years, allowing for future adjustments if needed.

After the installation, Larissa was thrilled with the results. "I feel so much more secure now," she said, relieved to have her home's stability restored.

Zack's home in Long Beach, built in 1921, had been in his family for 51 years. As he prepared to sell the property, ensuring its safety and stability was a top priority. Seeking a reliable solution, Zack found Saber Foundation Repair through the Earthquake Brace + Bolt (EBB) program and decided to have a seismic retrofit installed in the crawl space.

Our experienced foreman, Sammy Molina, led the project, bringing expertise and dedication to the job. The team installed a 164-foot Seismic A35 Framing Angle, 30 square feet of Cripple Wall Sheathing, 2 Foundation Wall Straps, and removed 2800 pounds of debris from the crawl space. These enhancements were crucial for reinforcing the home’s foundation against seismic activity, providing the stability needed for Zack’s peace of mind.

The Seismic A35 Framing Angle and Cripple Wall Sheathing work together to strengthen the home’s structure, while the Foundation Wall Straps offer additional support to the foundation walls. These upgrades ensure the home can better withstand the forces of an earthquake, making it safer for its future occupants.

After the installation was complete, Zack was thrilled with the results. "I feel confident now," he said, knowing that his family’s historic home was secure and ready for the next chapter.

Rene had lived in her West Hills home, built in the 1980s, since 2013. Aware of California's earthquake risks, she turned to the Earthquake Brace + Bolt program for protection. That’s where Rene discovered Saber Foundation Repair as a trusted contractor.

Our design specialist assessed the property and recommended a seismic retrofit of the crawlspace to secure the home against future earthquakes. The installation crew completed the retrofit in just one day, providing Rene with the peace of mind that hey home is now safer and better prepared for whatever the future may bring.

Gary and his wife have cherished their 1906-built home in San Gabriel, CA, for the past 20 years. Living in such an old and historic home has been a joy for them, but they were increasingly concerned about its ability to withstand California's notorious earthquakes. Given the age of the house, Gary knew that the foundation and structural elements likely needed reinforcement to ensure the safety of their beloved home.

Seeking a reliable and experienced company to handle the job, Gary turned to Saber Foundation Repair through the Earthquake Brace + Bolt program. Our design specialist conducted a thorough inspection of the home, identifying areas where the foundation and crawlspace required reinforcement. It was determined that a seismic retrofit would be the best solution to preserve the home's historic character while enhancing its structural stability. Our skilled team executed the retrofit with care, focusing on strengthening the foundation and securing the home against future seismic events.

With the seismic retrofit complete, Gary and his wife can now enjoy their historic San Gabriel home with greater peace of mind. The home’s foundation has been reinforced, ensuring that it is better equipped to withstand earthquakes while maintaining its original charm. Gary feels confident that their home, which has been part of their lives for two decades, is now safer and more resilient for the years to come.