Saber Foundation Repair Before & After Photos

PolyLEVEL™ was used to stabilize and lift this home.  The effects of PolyLEVEL™ are immediate.  You can see the result in this before and after as the door had a gap at the top when closed, once the PolyLEVEL™ was injected the gap is now closed and the door is much easier to open and close. 

The Before Picture shows a home starting to sink on one side.

The After Picture shows the homes foundation, where the over poured concrete has been cut away. Then our crew attached a Push Pier to the flush Foundation. These Piers lift the sinking part of the home.

The Before Picture shows a Support Post Sliding off a Fllor Joist.

The After Picture shows the Steel I Beam Supported By Smart Jacks.

The before photo shows failing posts resulting in the home having sticking doors and windows, out of level floors, and causing cracks in their drywall. The after photo shows how we replace some of the posts with 350 smartjacks® and a 70ft galvanized supplemental beam to fix their issues and restore value to their home.

The homeowner’s porch was uneven, causing water to pool against the foundation. This issue led to concerns about potential damage and required immediate attention.

Saber Foundation Repair addressed the problem by:

1. Stabilizing the Concrete: PolyLevel® foam injection was used to lift and level the porch.
2. Protecting the Concrete: NexusPro® joint sealant was applied to prevent water infiltration.
3. Tinting the Concrete: DecoShield™ was used to enhance the appearance and protect the surface.

The porch and driveway were effectively stabilized and leveled. The DecoShield™ tint provided both aesthetic appeal and added protection, ensuring the homeowner's property is now both visually appealing and safeguarded against future water damage.