Concrete Lifting & Leveling Before & After Photos
Click on a photo to enlarge.
PolyLEVEL™ in Sherman Oaks
In Sherman Oaks, California, Saber Foundations was contracted to fix an issue of severe concrete settlement in the area of a garage. The settlement was most likely caused by the combined weight of the concrete and what is supporting it. The soil beneath the concrete compresses and can cause major problems. Like the ones shown in this before photo, the concrete had settled and the walls had begun to show the signs of the settlement by gapping. Saber was able to quickly and affordably fix the issue for this homeowner, by using the PolyLEVEL™ process. The PolyLEVEL™ process is a two part foam used to inject into the ground to form a fill that is strong yet light weight. This process was completed and the end result was that of closing the gaps that the concrete sinking had caused. The great thing about PolyLEVEL™ is it waterproof, it does not react with soil or water, and does not leak hazardous chemicals into the soil. It also cures very quickly, so the process is messy and disruptive, in comparison to other foundation-lifting techniques.
PolyLevel(R) in Sherman Oaks
The Before Picture shows a void under the cement slab footing of Daniels Hall Army Reserve Center/Barkley Andross Corporation. This was causing the foundation to sink.
The After Picture shows a Saber crew member using our PolyLevel Injection Process to both raise, and make the slab more level.
PolyLevel (R) for Room Addition in Sherman Oaks
The Before Picture is a room addition that the homeowner has added. The floor was sloping up to three inches.
The After Picture shows Polyurethane being injected under the low spots in the floor.
PolyLevel Fills the Void Under a Bakersfield Foundation
The Before Picture shows what the homeowner found during remodeling.
The After Picture shows Saber filling the void using our PolyLevel Injection Process. Holes have been drilled through the slab and into the voids.
PolyLevel (R) in Torrance
The Before Picture shows a interior wall, of a home, with a crack that is continuing to grow over time.
The After Picture shows a patio area that has had PolyLevel Injected ito a void. This gave the Patio a consistant elevation.
The void under the patio was part of a Foundation issue with the home. This issue was causing the wall to crack.
