Foundation Repair Before & After Photos

The Before Picture shows a void that has formed under a Foundation. This void, and others are weakening this Foundation, and causing it to sink.

The After Picture shows a installed Push Pier. The Piers are pressurized. They Lift and strengthen the sinking areas.

The Before Picture shows the Excavated Hole to expose this Home Foundation.

The After Picture shows the Torqued Helical Post, that is being Pressurized. The excess Post will be Removed, so that this pier can be covered with dirt.

The homeowner in Los Angeles, CA, had been living in their home since 2012 and started noticing troubling signs of foundation settlement. Over time, cracks began appearing on the exterior walls, and parts of the foundation had sunk by one to two inches. The situation worsened, causing doors and windows to misalign and unsettling noises to echo through the house.

Saber Foundation Repair addressed the foundation settlement by installing eight helical piers around the entire home. These piers were strategically placed to lift and stabilize the foundation, halting any further sinking. Despite the tight spaces around the home, the installation was completed with precision and care.

This home in Los Angeles, California, was showing serious signs of settlement issues.  Saber was contracted to fix the foundation.  The push pier system was used to compete the job.  In these photos you can see the pier set up for the lift of the property and then once the lift is complete and the hoses are removed the pier is not a permeant fixture at the footing of the foundation.  Once the void is filled with PolyLEVEL™ the hole will be backfilled and the cleanup will begin and the project will be complete.  The homeowner will no longer see the signs of settlement, as the cracks will have closed and the doors and windows that once were hard to open and close, will now open and close with ease.