Job Stories

Homeowner Mr. Perez in Bloomington, CA faced a pressing issue: his manufactured home needed foundation repairs and leveling. Uneven floors and a dragging front door were clear indicators of this problem. Frustrated with these issues, Mr. Perez turned to Saber for assistance. Upon contacting us, our design specialist, Jason S., promptly evaluated the property. He thoroughly assessed the manufactured home, identifying the problem areas and discussing a viable solution. Jason proposed a coach leveling method and suggested adding three piers to stabilize the mobile property. This solution aimed not only to address the immediate issues but also to ensure the long-term stability of Mr. Perez's home.

When Frank purchased his house in Bloomington two years ago, he encountered a persistent issue: uneven concrete slabs on his driveway. Initially, he shrugged it off, assuming it wouldn't cause much trouble. However, as time passed, the unevenness became a recurring source of accidents for his family members, resulting in frequent trips and falls. Frustrated by these safety concerns, Frank decided it was time for a change. Seeking a solution, he turned to Saber for help. Our team quickly responded, sending our skilled design specialist to inspect his property. Through a thorough examination, our specialist, John, identified the problem areas and proposed our Polylevel service as the solution to fix and stabilize the uneven concrete slabs. Understanding the benefits of Polylevel, which involves filling voids underneath and sealing cracks caused by the lifts in the concrete slabs, Frank saw the potential to address his pain points. With the proposed plan in place, Frank eagerly anticipated the transformation of his once-uneven driveway. This solution not only promised a fix for the safety hazards but also offered a smoother, safer surface for his family.

Homeowner Richard W. had settling slabs of concrete in his pool deck at his home in Temecula that he desperately needed to fix. Richard said,” I noticed the problem about a year ago and since then it’s been getting worse. It now looks horrible and is a safety hazard for my family.” One of our Project Design Specialist Curtis L.  found several areas that needed work with PolyLevel to fill voids underneath as well as cracks caused by the lifts that will need to be sealed. One of our PolyLevel Specialists Scott L. inject PolyLevel into all the settling slabs and filled in all the cracks with our state-of-the-art Nexus Pro sealant. Now Richard and his family can enjoy their beautiful pool deck again and not worry about anyone tripping over their lifted and settling slabs around their pool deck. 

Homeowner Guy W. in Temecula needed to get his pool deck repaired with PolyLevel. His home was built in 2000 but moved into it a decade ago and it was problem-free till a few years ago. He started noticing that his slabs around the pool deck were settling. As the years went on the settling got worse and worse which was a big concern for Guy and his wife. The couple was unable to use the raised deck as they intended because they were concerned for not only their safety but also their kids. Our Project Design Specialist Steven O. evaluated the home and found that that the best way to fix the settled concrete was our Polylevel solution. Guy and his agreed and decided to move forward with the project with Scott L. and his crew. Scott installed 130 feet of NexusPro and filled two sections of the pool deck with PolyLevel. 

Melissa, a homeowner in Temecula, CA, noticed signs of water intrusion in her home and became concerned about potential damage. Wanting to address the issue before it worsened, she reached out to Saber Foundation Repair for a professional assessment.   Our design specialist conducted a thorough inspection of the home and identified areas where water was entering and pooling. To effectively manage and prevent further water intrusion, the specialist proposed installing a WaterGuard system along with a SmartSump. This combination would ensure proper drainage and keep the home dry and protected.   Melissa agreed to the proposed solution, and our team installed the WaterGuard system and SmartSump. The installation was completed efficiently, providing Melissa with peace of mind knowing her home is now safeguarded against future water damage

Homeowner David and Tracy N. in Temecula had a very large problem with their sidewalk in the backyard. Their 10’x12’ slab has settled because it was improperly mated with rebar to the adjoining slab with a cold seam. Because of this, the slab settled on one end in clay at approximately 1 ½ inches. They noticed the settling many years ago but never took care of the issue. Just recently Tracy tripped and luckily wasn’t injured. Not only was it unsafe, but it can bring down the value of their home and the couple is considering selling their home in the near future. Our Foreman Scott and Raymond removed the grout of the large slab by the problem section of the settling concrete. Once detached, Raymond drilled 5 dime-sized holes into the slab so that Scott can lift the concrete underneath with PolyLevel. After the slab is lifted, they then filled the holes and grout with Nexus Pro which will make sure our work is disguised as much as possible and is left seemingly untouched! David and Tracy were in love with the results! They couldn’t believe how fast and clean our process was. David said, “You guys do amazing work! I’m very pleased and if we ever need anything like this again, we’ll contact Saber.” Now the couple has preserved their home's value as well as regained their peace of mind that their home is safe again.

Temecula resident Chris contacted Saber regarding Trip Hazards Formed by cracks and sinking slabs on his concrete driveway. Our Project Design Specialist performed a Free and thorough Homeowner inspection of the property. Shifting soils had created voids under the concrete driveway. The attached picture shows the trip hazard that formed when one of the slabs started sinking. Saber's crew drilled holes through the concrete and into the voids. We then injected polyurethane to fill the voids. This raised the slabs that had sunk. Saber then sanded the drilled holes until they were smooth. The Trip Hazards had been eliminated. Chris was happy with the result.

Temecula resident Rick S. contacted Saber regarding cracks in the pool deck of his home. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection of Rick's home. Voids were found under the concrete deck. These voids were caused by water leaks in the pool's equipment. Saber's crew exposed the water leak for Rick to fix. We then filled the voids the leak had created. Rick was happy with Saber finding the cause of the crack in the deck, and fixing this issue. The attached picture is of a void created by the leaking equipment.

Temecula resident Rick S. contacted Saber regarding Trip Hazards that were getting worse on his Patio. Saber's Project Design Specialist performed a Thorough Inspection of Rick's Home. This inspection is free to Homeowners. Voids were located under the Patio. Saber's crew filled the Voids with Polyurethane, by using our State-of-the-Art PolyLevel Injection Process. This eliminated the Trip Hazards. The attached Picture shows a Saber Crew member cleaning up afterwards.

  Temecula resident George W. contacted Saber about his failing hillside deck.  Saber Design Specialist Dan F. recommended the Saber Lateral Force System to correct George's failing deck.  Foreman Joe S. and crew arrived at the job site ready to install. They started with the helical anchors, then moved on to installing a push pier. George was happy with the finished product and gave Joe and crew a great review.