Job Stories

Homeowners in Murrieta, California were looking for a way to make their dirty musty crawlspace more energy efficient and possibly use it for added storage.  They contracted Saber to take their dirty crawl space and make it a CleanSpace.  With the CleanSpace encapsulation by Saber, they were able to achieve their goal.   A dirt filled crawl space adds a continuous stream of water vapor into your home, and any underground leakage lays in the crawl space slowly evaporating into the home.  This home also has a block wall which in most homes, this is the easiest and cheapest material to build a foundation, however; they are also the least resistant to water and air going through them since there are so many joints in the wall.  So like it or not you are breathing dirt crawlspace air.  No longer for these homeowners, with the CleanSpace encapsulation system, installed by Saber, these homeowners know are breathing clean air and have a nice “clean” crawlspace to use for storage.  

Murrieta resident Susan contacted Saber about Trip Hazards in her driveway. She told us that they had already tried grinding the concrete smooth, and the problem continued to get worse. Sabers Project Design Specialist completed a thorough inspection of Susan's Home. The soil was shifting under the driveway. This had created voids, and had caused one of the concrete slabs to start sinking. The attached picture shows what voids do to concrete slabs. Our crew drilled holes through the sunken slab and into the void. Then we filled the void with Polyurethane, using our State-of-the-Art PolyLevel Injection Process. This raised the slab that had sunk. Last of all we filled in the drilled holes, and the spaces between the slabs using the Nexus Plus Caulk filling. Susan and her husband were glad that this safety hazard no longer existed.

Murrieta resident Tim R. contacted Saber regarding sticking doors and windows in his home. Saber's Project Design Specialist found a very large Void, under the Foundation of Tim's home, during our Inspection. Please see the attached picture. The Foundation was weakening, and sinking into this Void. Our crew excavated holes next to the Foundation and attached Push Piers to the Foundation. When pressurized, the Piers Lifted and Strengthened Tim's Foundation. Then we filled this void with Polyurethane, to keep it from expanding. This also Stabilized Tim's Foundation.

This is a test

Lakeside resident Pat W. contacted Saber regarding concrete cracking, that had become trip hazards around the swimming pool. Saber's Project Design Specialist performed a free homeowner inspection and provided Pat with a report. The ground soils had shifted under the concrete slabs, creating voids. These voids were causing the concrete to crack and ultimately sink. Our crew injected PolyLevel. This filled the voids and leveled the sinking part of the concrete slab. Pat was happy with the result and the clean up.

Wildomar resident Scott R. contacted Saber regarding a trip hazard in a commonly used area. Our Project Design Specialist performed a complete evaluation. Our crew used our PolyLevel process, to raise the sunken slab, to the same level as the other slabs. Scott was happy with the results and the clean up.

Weldon resident Nelson S. contacted Saber in regards to his home's concrete slab sloping and being cracked. Nelson was remodeling his home. He removed the carpet and spotted this problem. Saber's Project Design Specialist performed a complete inspection. Sabers crew installed Push Piers to strengthen the foundation. Nelson was pleased with the result and the clean up. The picture shows one of the cracks in the slab.

Weldon resident Nelson contacted Saber regarding cracked floors he found in his home when he was renovating his home. He had removed the home's carpet and discovered this issue. Saber's Project Design Specialist completed a thorough inspection of Nelson's Home. Our crew excavated holes around the foundation of the home. We attached Push Piers to the base of the home's foundation. These strengthened the home's foundation. Our crew then filled in the holes, tamped down the soil, and cleaned up. Nelso was happy that the issue had been resolved.

Dulzura resident Garth C. contacted Saber regarding his home leaning to one side. See the attached Picture. Saber's Project Design Specialist performed A Free Home Inspection since Garth is the Homeowner. Voids had formed under part of the Foundation. This part of the Foundation was Sinking and Cracking. Saber recommended attaching Push Piers to the Foundation. When Pressurized, these Piers will Lift and Strengthen Garth's Foundation. They will also give the Foundation a Consistent Elevation. There will be no more sloping Issues. We also suggested Filling the Voids with Polyurethane to Stabilize the Foundation.

Jamul resident Clark A. contacted Saber regarding cracks in his driveway, that were becoming trip hazards. He mentioned that there was a hollow sound when knocking on the slabs. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids had formed under the driveway. This was caused by shifting soils. We quoted our State-of-the-Art PolyLevel Injection Process to fix this issue. Clark received a written inspection report and a 30 day quote.