Job Stories

Saber was contacted by Matt regarding being used as a Sub -Contractor. The Foundation Slab, of the Government Building, had voids under it from settling dirt. Saber's Project Design Specialist completed a full evaluation of this work site. Our crew drilled holes in the concrete slab where the voids had formed. The Saber used our State- of- the- Art PolyLEVEL Injection Process to fill the voids. This lifted the areas of the slab that had sunk. The attached picture shows a Saber crew member Injecting PolyLEVEL. Matt was satisfied with the results, and was able to move forward with the project.

Sheman Oaks resident Edgar contacted Saber regarding his home remodel room addition. The remodeled part of the home had floors that were sinking. Saber's Project Design Specialist performed a thorough and Free homeowner inspection. We discovered that areas of the Add On Foundation were sinking, creating voids udder the room that was added. Saber's crew excavated holes and installed Push Piers to the sinking areas of the Foundation. These Piers lifted the areas that had sunk. Then we used Saber's State-of-the-Art PolyLevel Injection to fill the void under the low spots of the floor. The attached Picture is a installed Push Pier Lifting, Stabilizing, and Strengthening Edgar's Foundation. Now both the inside and the outside of Edgar's home are at a constant elevation.

Sherman Oaks homeowner Christine B. knew that her crawlspace had an issue with moisture. She wanted a quote for a dehumidifier as well as an evaluation of the crawl space. Project Design Specialist Jason S. inspected the crawlspace and took pictures, measurements, and moisture readings. Jason recommended our CleanSpace Crawl Space Encapsulation System. With the installation of CleanSpace, the issues of mold, moisture, insects, and drainage will be remedied. Energy bills will also be lowered. Christine writes, "Jason did a wonderful job! He took the time and went throughout the entire space. We appreciate the time Jason spent and feel that your company is one of the best in the city! Thank you."  At Saber, we seek to give our customers quality WOW! service. We are happy to have succeeded once again.   

Homeowners Rosa and Elena C in Bakersfield, CA wanted to get their home foundation repaired. They needed their manufactured home leveled and fix the cracked in caused in the back of their home. The 1989 home that they bought 5 years ago began this problem around 6 months ago and the couple wanted to get it fixed. Our project design specialist Eamon R. evaluated the property found that the manufactured home needed a coaching adjustment and 3 of their piers needed to be replaced. The piers needed to be replaced because not only were they rusting which can be dangerous, they also weren’t up to code standards. Bryan and his crew took on this project and completed the coach adjustment and installed 3 new piers that were up to code. Now the manufactured home is safe and level when it wasn’t before. The homeowners now have peace and mind and no longer have to worry about their home. 

Bakersfield resident Vikie E. contacted Saber when she was having her home remodeled. Her home was built in 1980. The carpet and padding had been removed, and there were several cracks in the home's Foundation. Saber's Project Design Specialist performed a thorough inspection of Vickie's home. Voids were found under her home Foundation. These voids had caused a large portion of the home's Foundation to sink. The weakened Foundation was now cracking. We verified that parts of the Concrete Slab had sunk as much as one inch. Saber's crew excavated holes and trenches next to the Foundation. We then Installed Steel Beams and Push Piers, to lift and strengthen the parts of the foundation that had sunk. The the voids were filled with Polyurethane, by using Saber's State-of-the-Art Polylevel Injection Process. The attached picture shows part of this process.The entire concrete slab Foundation now had a constant elevation. Saber's crew then filled in the trenches and holes. Excavated concrete had been removed and disposed. New concrete was poured. Vicki was happy with our work. She could now continue with the remodeling, that she had started. Vicki also had peace of mind that her home Foundation was much stronger, and much more stable.

Culver City resident Valle A contacted Saber regarding cracking in his home driveway. A Saber project design specialist performed a complete evaluation. The soil under the driveway was unstable. Our crew, using the Saber state-of-the-art PolyLevel soil stabilization corrected this situation.  Valle was satisfied that this situation has been corrected and will not get worse in the future. Valle also liked the post-job cleanup.

Valencia resident Stephen J. contacted Saber regarding his cracking sidewalk and driveway. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids were found under the sidewalks and driveway. Saber suggested filling the voids with Polyurethane by using our State-of-the-Art PolyLevel Injection Process. This will eliminate all of the trip hazards.

Saber Foundation was called to a home in Hawthorne, CA to inspect and evaluate major cracks both within and along the outer walls of the stuccoed home. After inspection, it was determined that about 3/4 of the house was experiencing major settlement. The raised foundation contained numerous cracks and all existing post and pads were in terrible shape. When Saber's piering team arrived, they got right to work. First, post pads were installed, backfilled, with concrete poured back. One special twist for this job was that the homeowner and family were able to leave their mark on their home by leaving handprints in the newly poured concrete. Next, the team removed and replaced 12 post and pads in the crawlspace and installed AC post caps on all posts. In order to install part of the piers, the team had to remove and put back a part of the patio deck. Saber was able to alleviate this family's foundation problems by halting any further settlement on 2/3 of the home and reinforced all beams underneath the domicile. The clients were super happy throughout the process.

Hawthorne resident Andy F. contacted Saber regarding Cracks that were spreading in the walls of his home. Saber's Project Design Specialist performed a thorough Home Inspection. Voids were located under the Foundation. The Foundation was sinking and cracking. Saber's crew attached Push Piers to the base of the Foundation. See the attached Picture. We Pressurized the Piers, which lifted the sinking areas. This strengthened the Foundation, and gave it a Consistent Elevation. Then we filled the Voids with Polyurethane to Stabilize the Foundation.

Delano resident Mary S. contacted Saber regarding exterior wall cracks and sticking windows and doors in her home. Our Project Design Specialist performed a Free Homeowner Inspection. Mary's home had sunk two and a half inches. There was a large cracked portion of the slab, running through one of the bedrooms, causing the room to lean. Saber recommended installing Foundation Piers to the Foundation. When Pressurized, the Piers lift the Foundation back to a consistant elevation. Mary received a written 30 day quote and a copy of the inspection report.