Job Stories

Fillmore resident Simone C. contacted Saber regarding cracks in the walls of her home. Our Project Design Specialist performed a complete evaluation of Simone's home. Saber's crew exposed the parts of the foundation, that were sinking, and installed Push Piers. Our crew then caulked the cracks. Simone was happy with the end result and the clean up.

Frazier Park resident Thomas G contacted Saber regarding uneven floors in his home. Our Project Design specialist performed a thorough evaluation of Thomas's home.  Our crew added cross braces to the Crawl Space and added cement bases to the existing posts. Thomas was happy with the completed job and the clean up.

Saber Geotechnical Construction Solutions proposed to stabilize an apartment complex in Agoura Hills using the Helical Piers and PolyLEVEL™ system.  PolyLEVEL™ is a two-part urethane that when combined, expands into a rigid foam used to fill voids, stabilize slabs and lift concrete.  Once injected through small 5/8 inch drilled holes in the surface or slabs, a chemical reaction converts the liquid urethane components into a strong, rapidly setting, waterproof foam material. In it’s foam state, PolyLEVEL™ is light weight, weighing two to six pounds per cubic-foot (pcf).  Opposed to mud-jacking which can weigh upwards of 120 pcf, thus adding a significant burden to the supporting soils under the slab, and potentially contributing to further settlement issues.  With a compressive strength of 10,800 pounds per square foot, PolyLEVEL™ has the strength to support the most demanding residential loads.  For this job, Saber will use the polyurethane injection as a void fill once the helical pier system has been installed and the structure has been lifted in order to prevent any future settling. 

Homeowners Jo and Michael K. in Moorpark opted for our Seismic Retrofitting service. The 1959 home that they have been living in for the past 40 years started showing interior cracks a year ago and their problems started becoming worse within the past few months. Project Design Specialist Eamon R. during the inspection found that there were cracks outside and inside the home. Eamon also found that a concrete pad was deteriorating which was the main factor why the homeowners had their issues. He purposed two new posts with pads and caps paired with a post and cap replacement. The project was led by Bryan A. and his crew and was completed in no time! Jo was so happy with the quality of service she and her spouse received. She wrote on Google, “- The workers that showed up were a pleasure to deal with. In fact, everyone we dealt with at this company seemed very proficient, if a question couldn’t be answered, we were quickly transferred to someone that could answer. – I will not hesitate to use them again.”

Moorpark resident James E. contacted Saber regarding exterior cracks in the walls of his home. Our Project Design Specialist performed a thorough inspection of James's home. The foundation of his home was sinking. Our crew istalled Push Piers to lift and strengthen the homes foundation. We then caulked the cracks, which is shown in the picture. James was happy with the result and the clean up.  

Thousand Oaks resident Lillian G. contacted Saber regarding Cracks in the walkways of her home. These cracks were becoming Trip Hazards. Saber's Project Design Specialist performed a thorough and Free Homeowner inspection. Voids had formed under the walkways of Lillian's home. Our Crew drilled holes in the walkways. We then used Saber's State-of-the-Art PolyLevel Injection Process to fill these voids with Polyurethane. Last of all, Nexus Plus was applied, to fill and seal the cracks. The attached picture shows how one of the walkways turned out. Trip hazard eliminated. Lillian was happy with the end result. She now has peace of mind.

Thousand Oaks resident Janice J. contacted Saber regarding the Cracks, that have become Trip Hazards in her Driveway. Voids have Formed under the Driveway. Saber's crew drilled through the Concrete and into the Voids. We then used our State-of-the-Art PolyLevel Injection Process to fill the Voids with Polyurethane. This eliminated the Trip Hazards. Saber then Used Nexus Pro to fill the Cracks. See attached Picture.

Newbury Park resident contacted Saber regarding Cracks that were causing Trip Hazards in her deck. Saber's Project Design Specialist performed a thorough and free homeowner inspection. The soils has settled under the patio. This had created voids. These voids had caused some of the concrete slabs to sink under the patio tile.  Our Crew drilled holes through the concrete into the voids. Saber then filled the voids and lifted the sunken slabs using our State-of-the-Art PolyLevel Injection system. This solved the trip hazard issue.

Newbury Park resident Dora D. contacted Saber regarding cracks running through her tile patio. See the attached picture. Saber's Project Design Specialist performed a thorough inspection of Dora's home. Voids had formed under the concrete patio slab. Our crew drilled holes through the slab and into the voids. We then filled these voids with Polyurethane, using Saber's State-of-the-Art PolyLevel Injection Process. This gave the slab a consistant elevation. Then we filled the cracks with grout. Dora was happy with the completed work.

Taft resident Tina S contacted Saber about cracks in the interior and exterior walls of her home. She also has problems with doors sticking. Our project design specialist performed a complete evaluation of the home. The foundation was weak and there were voids under it. Our crew used the state-of-the-art Polylevel process to fill the voids. We also added push piers to strengthen the foundation. Tina was satisfied with the completed job and the clean up.