Job Stories

Corona resident Robert contacted Saber regarding Trip Hazards on his Driveway. Saber's Project Design Specialist performed a thorough inspection. Voids had formed under the driveway. These voids were caused by shifting soil. Some sections of concrete were sinking, causing trip hazards.  Saber's crew drilled holes in the concrete slabs, that were sinking. We then injected our State-of-the-Art PolyLevel into the voids. This raised and the sunken slabs and eliminated the trip hazards. The attached picture shows the driveway joints being taped and the holes drilled. Robert was happy with the result of the work, and the crew's clean up.

Larry S. contacted Saber because he was having issues with his concrete. After speaking with him, we determined that he would be a great candidate for our free evaluation for homeowners. In the evaluation, Saber's Design Specialist determined that the concrete issues were caused by moisture getting into the soil underneath his concrete through years of cracking. Our Design Specialist determined that Larry needed Saber's Concrete Protection Program, which includes injecting polyurethane to fill all voids and Nexus Pro to seal all cracks and joints. PolyLevel Foreman Scott L. and crew arrived on time and ready to work. They filled all voids, and sealed all joints and cracks to prevent further damage. Larry was very happy with the work performed by Scott and crew, saying "The results turned out better than expected." 

Homeowners in Spring Valley, California, had started to notice a lot of cracking in the interior and exterior of their home.  They as noticed huge cracks that had formed in the slab of their patio deck.  These are all signs of soil settlement.  This type of settlement is due to the expansive soils beneath the homes foundation.  The homeowners knew they needed to find a fix for this issue before it became much more serious.  The homeowners did some research and found Saber, they set an appointment for a Saber design specialist to come to the property for a free property evaluation.  The design specialist proposed that the home be stabilized and lifted to maximum practical recovery using Push Piers.  It was also proposed to repair the cracks that had formed in the slabs and then use PolyLEVEL™ to fill any void that may have been caused due to the lift of the property.  The Saber crew was then scheduled to complete the project.  The Crew arrived and went to work using the proposed design to map out the pier locations, once the locations had been determined the crew began to excavate the areas in order to place the piers at the proper locations.  Sixteen Push Piers were placed around the property and then the lift of the property was preformed.  Once the lift had been completed the PolyLEVEL™ was injected beneath the foundation to fill any voids and the home is now stabilized and lifted to maximum practical recovery,  The homeowners no longer see the signs of settlement that once plaqued their home.  The cracks that had formed are now closed and any doors and windows that were hard to open and close are no longer an issue. 

Presioca Villa Apartment in Spring Valley contacted Saber regarding sidewalks that had become trip hazards. Our Project Design Specialist performed a thorough inspection. Tree roots were buckling the sidewalks. Our crew removed all of the damaged concrete slabs. We then excavated the tree roots. New forms were built, and new concrete was poured and finished.  

A home in Vista, California was suffering from settlement issues, the signs of settlement in the home were very evident from cracks in the walls and ceilings, to sticking doors and windows.  The homeowner knew something needed to be done to fix the issues that were occurring at the home.  The homeowner did some research and found that Saber was the company for him.  The design specialist proposed that the foundation be repaired using push piers and polyLEVEL™ for stabilization and lift to maximum practical recovery.  The Saber production crew was scheduled to complete the project.  They arrived at the home and went straight to work, excavation holes at the proposed pier locations for the best results.  They then installed the piers.  The piers were installed at the foundations footings and driven into the ground until they reached bedrock below.  They were then set up to lit the property, once the lift was compete the polyLEVEL™ was injected to further stabilize the property and attempt to lift the property more.   Once the lift and PolyLEVEL™ injection was completed the holes were then backfilled. The cracks that had formed around the property were then repaired by the Saber crew, they repaired the cracks that had formed in the walls and slabs around the property.  The homeowner was very pleased with the work completed and is happy to know his investment is now stabilized.

David from Vista contacted Saber regarding cracks in a concrete slab at a commercial site. Construction was underway, and voids had formed due to shifting soils. The Saber crew Drilled holes through the concrete and into the voids. The the voids had PolyLevel Injected into them. This resolved the issue, and allowed David to move forward with his project.

Vista resident James W. contacted Saber regarding several Cracks in his Front Porch and Back Patio. Saber's Project Design Specialist performed a complete property inspection. This inspection is Free to the Homeowner. Voids were located under the Concrete. The Slabs were sinking into these Voids. This was causing the cracks to form. Saber's crew drilled Holes through the Slabs and into the Voids. Then using Saber's PolyLevel Injection Process, we filled the Voids with Polyurethane. This Lifted the Sinking areas back to a Consistent Elevation, and eliminated the Trip Hazards, that had started to form.

Homeowner Steven L. of Vista had concerns about his pool deck. The concrete had sunk over an inch below the decorative edging of the pool, creating a trip hazard. Pool trip hazards are especially dangerous in the event of  wet conditions during pool use. Crew foreman Scott and his team did an application of PolyLevel and sealed the cracks with NexusPro joint sealant. After the installation was completed, Steven wrote of the experience. "Fantastic experience. Scott and his crew are extremely experienced, respectful, and presented themselves in a very professional manner. I was very impressed and would welcome them back to do work in the future. Your team treated my property as if it were their own. I couldn't have asked for a more respectful crew to come and help with my slab problem." Saber crew members are committed to our mission to redefine our industry. That is what we call our WOW! service.     

Vista resident Garrett F.'s home was experiencing settling, resulting in major cracks in the slab and making doors hard to open. Project Design Specialist Paul D. recommended the installation of eight push piers as well as an application of PolyLevel. Garrett writes of Paul, "Paul has been an absolute pleasure to work with. He has gone way above and beyond any expectation that anyone could have. He worked day and night after normal working hours to answer, research, and help out in any way." Garrett also gave Saber's crew, led by Jesus, high marks. "Jesus was our foreman for the pier installation, extremely polite, explained everything along the way, and encouraged questions during the entire process." The entire experience exceeded Garrett's expectations. Saber is committed to providing WOW! service from start to finish.    

Claremont resident David N. contacted Saber inquiring the Earthquake Brace and Bolt promotion offered by the state of California. Our Project Design Specialist performed a thorough inspection of David's  home. Our crew installed Seismic Retrofitting Universal Foundation Plates and A35 Framing Angles to strengthen the foundation of David's home. David was happy with the end result and the clean up.