Job Stories

Dana Point resident Dave D. contacted Saber regarding cracks in his patio. Saber's Project Design Specialist performed a complete inspection of Dave's home.  Sabers crew chased the cracks and filled them using the Nexus Pro process. The attached picture shows the finished job. The Nexus Pro is the white material, that is sealing the brick to the concrete trim. Dave was happy with the result.

Dana Point resident Saim T. contacted Saber regarding cracks in the walls and driveway of his home. Our Project Design Specialist located voids during the Free Homeowner inspection. Saber's crew excavated holes next to the Foundation of Saim's home. We then installed Push Piers to the base of the concrete slab. Our crew pressurized the Piers, which lifted the sinking areas of the Foundation. The attached picture shows a installed Push Pier being Pressurized. The Push Piers strengthened and Stabilized the entire Foundation. Saim was happy with the results.

Arcadia resident Mark C. contacted Saber in regards to the Crawlspace of his home.  It was cold and drafty. Saber's Project Design Specialist performed a Free Homeowner inspection of Mark's home. There were too many vents and the Crawlspace door needed to be replaced. We also thought debris removal and CleanSpace insulation would solve these issues. We provided the report and quote. 

Laguna Niguel resident Christopher contacted Saber regarding cracks that were appearing in his home and his swimming pool deck. His home backs up to a slope. Saber's Project Design Specialist peformed a thorough and Free homeowner inspection. The shifting soils inder the swimming pool and home foundation had weakened both. Saber obtained a engineers soils report and the city permits for Christopher. Our crew then removed and replaced the part of the pool deck that had sunk. We then strengthened the home foundation , and the swimming pool, by installing Helical Push Piers, Helical Tiebacks, and Steel Beams. This solved the shifting soils dilemma. The attached picture shows a installed Helical Pier and Tieback. Chistopher was happy with the results and the crews clean up.

Laguna Niguel resident Paul M. contacted Saber regarding cracks, that were spreading, in the bottom of the exterior walls of his home. Saber's Project Design Specialist performed a Free, and Detailed Homeowner Inspection. The soils had shifted under part of Pauls Foundation. Voids had formed. His home was sinking into this Void. Our crew excavated holes where the foundation was sinking. We then installed Push Piers and Pressurized them. This Strengthened Paul's Foundation, by lifting the sunken areas, and giving his Foundation a consistent elevation. We then Filled the Voids with Polyurethane. This Stabilized the Foundation, by preventing these voids from increasing in size. Paul now has Peace of Mind, that his home is safe.

Laguna Niguel resident Viviane M. contacted Saber regarding Cracking Floors and Walls in Her Home. Saber's Project Design Specialist performed a thorough Inspection of Viviane's home. Shifting Soils has caused Voids under the Concrete Slab Foundation. Saber's crew attached Push Piers to the outer sides of the Foundation, to Both Lift and Strengthen the Foundation. We then Filled the Voids under the Slab with Polyurethane to Stabilize the Foundation. See attached picture.

Laguna Niguel homeowner Bill H. has a beautiful entryway with a circular landing leading up to his front porch. The landing had settled, making a trip hazard. Saber can help with trip hazards due to settled concrete. Project Design Specialist Steven O. recommended an application of Polylevel to level and fill the void under the landing, as well as NexusPro joint sealant to repair the cracks. Regarding Steven, Bill writes, "Very professional. On time, great follow up." Sometimes it's not the home that needs attention, but the areas surrounding the home. At Saber, we are happy to assess your situation and offer solutions. That's part of our commitment to WOW! service.      

A home in La Habra, California was suffering from settlement issues, the signs of settlement in the home were very evident from cracks in the walls and ceilings, to sticking doors and windows.  The homeowner knew something needed to be done to fix the issues that were occurring at the home.  The homeowner did some research and found that Saber was the company for him.  The design specialist proposed that the foundation be repaired using push piers and polyLEVEL™ for stabilization and lift to maximum practical recovery.  The Saber production crew was scheduled to complete the project.  They arrived at the home and went straight to work, cutting concrete and excavating holes at the proposed (7) pier locations for the best results.  They then installed the piers.  The piers were installed at the foundations footings and driven into the ground until they reached bedrock below.  They were then set up to lift the property, once the lift was compete the polyLEVEL™ was injected to further stabilize the property and attempt to lift the property more.   Once the lift and PolyLEVEL™ injection was completed the holes were then backfilled and the concrete was re-poured. The cracks that had formed around the property were then repaired by the Saber crew, they repaired the cracks that had formed in the walls and slabs around the property.  The homeowner was very pleased with the work completed and is happy to know his investment is now stabilized.

La Habra residents Luke amd Megan J. contacted Saber regarding upgrading the California Building Code for Earthquakes. Saber's crew attached Universal Foundation Plates (see attached picture), A35 Framing Angles, and Post Caps in the Home's Crawlspace.  The Homeowners now have Peace of Mind.

Hacienda Heights resident Patricia B. contacted Saber regarding Cracks in the walls of her home. Saber's Project Design Specialist performed a Free Homeowner Inspection. Voids had formed, caused by shifting soils, under the Foundation. Saber's crew excavated holes and attached Push Piers to the base of the Foundation. The Piers were then pressurized. This Lifted and Strengthened the Foundation. See the attched picture.The Voids were then filled with Polyurethane, using Saber's PolyLevel Injection Process. This Stabilized the Foundation.